PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10-03542
10-03542 ✓ Verified by PartsTable
3M · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include material: STEEL COMP 410 OVERALL, body_style: ROUND OPEN BODY, body_length: 1.250 INCHES NOMINAL IN, thread_class: 2B BODY, hole_diameter: 0.102 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN, outside_diameter: 0.215 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-300-9495, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-03542
NSN: 5340-00-300-9495
FSC: 5340
CAGE: 03670 — TYCO FIRE PRODUCTS LP (USA)
SPECIFICATIONS
materialSTEEL COMP 410 OVERALL
body_styleROUND OPEN BODY
body_length1.250 INCHES NOMINAL IN
thread_class2B BODY
hole_diameter0.102 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
outside_diameter0.215 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
special_featuresB-1B ACFT; OSE41A01
style_designatorFLAT INTERNAL TEETH
surface_treatmentPASSIVATE OVERALL
material_thickness0.012 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN
nominal_thread_size0.250 INCHES BODY IN
end_item_identification3895-01-577-2425
NSN5340-00-300-9495
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10-03542 MFR: 3M ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: ANODIZE OVERALL
•
MATERIAL: ALUMINUM OVERALL
•
BODY STYLE: ROUND OPEN BODY
•
THREAD SERIES DESIGNATOR: UNF BODY
•
NOMINAL THREAD SIZE: 0.250 INCHES BODY IN
•
THREAD CLASS: 2B BODY
•
BODY LENGTH: 1.250 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTANODIZE OVERALL
MATERIALALUMINUM OVERALL
BODY STYLEROUND OPEN BODY
THREAD SERIES DESIGNATORUNF BODY
NOMINAL THREAD SIZE0.250 INCHES BODY IN
THREAD CLASS2B BODY
BODY LENGTH1.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
127183AInterchangeable
interchangeable cross-reference
interchangeable
4040984Interchangeable
interchangeable cross-reference
interchangeable
N-20492-FInterchangeable
interchangeable cross-reference
interchangeable
9156818-3Interchangeable
interchangeable cross-reference
interchangeable
100354-2Interchangeable
interchangeable cross-reference
interchangeable
1703-00-410Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-03542?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-03542?
10-03542 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E manufactured by 3M.
What parts can replace 10-03542?
There are 6 known substitutes for 10-03542: 127183A, 4040984, N-20492-F and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10-03542?
10-03542 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-300-9495. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-03542

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026