PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10-0220-1
10-0220-1 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include end_item_identification: MRAP - UNIQUE NSN - USED ON 3 MRAP VARIANTS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-620-5338, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-0220-1
NSN: 5315-00-620-5338
FSC: 5315
CAGE: 03966 — ZURN INDUSTRIES INC (USA)
SPECIFICATIONS
end_item_identificationMRAP - UNIQUE NSN - USED ON 3 MRAP VARIANTS
NSN5315-00-620-5338
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10-0220-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHOULDER DIAMETER: 0.312 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
FIRST END LOCATION: SHANK END
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
MATERIAL: STEEL COMP B1112 OVERALL
•
STYLE DESIGNATOR: SHOULDER
•
SHANK DIAMETER: 0.253 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SHOULDER DIAMETER0.312 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
FIRST END LOCATIONSHANK END
NOMINAL THREAD SIZE0.312 INCHES IN
SPECIAL FEATURESSLOT FULL LENGTH OF SHOULDER 0.037 IN. MIN 0.047 IN. MAX W BY 0.062 IN. DEEP IN
MATERIALSTEEL COMP B1112 OVERALL
STYLE DESIGNATORSHOULDER
SHANK DIAMETER0.253 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
OVERALL LENGTH3.125 INCHES NOMINAL IN
THREAD LENGTH0.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
209-375-035-101Interchangeable
interchangeable cross-reference
interchangeable
35-128Interchangeable
interchangeable cross-reference
interchangeable
1-0022-01Interchangeable
interchangeable cross-reference
interchangeable
24403Interchangeable
interchangeable cross-reference
interchangeable
12759-00682Interchangeable
interchangeable cross-reference
interchangeable
600289PC14Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-0220-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-0220-1?
10-0220-1 is a BOLT,MACHINE.
What parts can replace 10-0220-1?
There are 10 known substitutes for 10-0220-1: 209-375-035-101, 35-128, 1-0022-01 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10-0220-1?
10-0220-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-620-5338. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-0220-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026