PartsTable
Technical Data Sheet
Download PDF

10-0133-1 — PANEL,INDICATING,LIGHT TRANSMITT

✓ Government record, cited
3M · ORING SEAL
PRODUCT OVERVIEW

10-0133-1: PANEL,INDICATING,LIGHT TRANSMITT.

PANEL,INDICATING,LIGHT TRANSMITT. Key specifications include material: PLASTIC PANEL, construction: ONE-PIECE, indicator_type: LIGHT LOCATION NOT OTHERWISE SPECIFIED, overall_height: 6.594 INCHES NOMINAL IN, overall_length: 5.558 INCHES NOMINAL IN, outside_diameter: 0.782 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-551-0553, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-0133-1
NSN: 5330-00-551-0553
NIINs: 005510553, 010358189, 012576588, 013881504
FSC: 5330 — Packing and Gasket Materials
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialPLASTIC PANEL
constructionONE-PIECE
indicator_typeLIGHT LOCATION NOT OTHERWISE SPECIFIED
overall_height6.594 INCHES NOMINAL IN
overall_length5.558 INCHES NOMINAL IN
outside_diameter0.782 INCHES NOMINAL IN
special_featuresPANEL LIGHTING SHALL MEET REQUIREMENTS OF MILITARY SPECIFICATION MIL-L-85762, LIGHTING, ACFT INTERIOR, AVIATORS NIGHT VISION IMAGING SYSTEM (ANVIS) COMPATIBLE
special_markingsAPP; CONTROL; AUTO SHUT DOWN MODE; PRESS TO RESET; HIGH EXH TEMP; OVER SPEED; LOW OIL PRESS; SHUT OFF; CKT BKR CONTROL; OFF; ON; RUN; START
ac_voltage_rating5.0 VOLTS NOMINAL
surface_treatmentCADMIUM RETAINER
retainer_thickness0.050 INCHES NOMINAL IN
functional_descriptionFACE PLATE, CONTROL PANEL 41792-1
NSN5330-00-551-0553
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10-0133-1 MFR: 3M ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PACKING INSIDE DIAMETER: 0.430 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.782 INCHES NOMINAL IN
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.072 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 2BG615E3 ASSN STD ALL MATERIAL RESPONSES PACKING
•
RETAINER THICKNESS: 0.050 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM RETAINER
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU PACKING
•
CONSTRUCTION: ONE-PIECE
TECHNICAL CHARACTERISTICS
PACKING INSIDE DIAMETER0.430 INCHES NOMINAL IN
OUTSIDE DIAMETER0.782 INCHES NOMINAL IN
PACKING RING CROSS-SECTIONAL DIAMETER0.072 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 2BG615E3 ASSN STD ALL MATERIAL RESPONSES PACKING
RETAINER THICKNESS0.050 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM RETAINER
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU PACKING
CONSTRUCTIONONE-PIECE
SUBSTITUTES & CROSS-REFERENCES 3
9018310Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
678651-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
620-042-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 10-0133-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-0133-1?
10-0133-1 is a PANEL,INDICATING,LIGHT TRANSMITT manufactured by 3M.
What parts can replace 10-0133-1?
There are 3 known substitutes for 10-0133-1: 9018310, 678651-4, 620-042-4. Substitute compatibility should be verified for your specific system.
What is the NSN for 10-0133-1?
10-0133-1 is cataloged in the U.S. Government catalog under NSN 5330-00-551-0553. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-0133-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.