PartsTable
Technical Data Sheet
Download PDF

1.045IDX0.040W COMPOUND 11647 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1.045IDX0.040W COMPOUND 11647: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ, center_hole_diameter: 1.039 INCHES MINIMUM AND 1.051 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-030-1828, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1.045IDX0.040W COMPOUND 11647
NSN: 5331-01-030-1828
FSC: 5331 — O-ring
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER FLUOROSILICONE CLASS FQ
center_hole_diameter1.039 INCHES MINIMUM AND 1.051 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
NSN5331-01-030-1828
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1.045IDX0.040W COMPOUND 11647 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 1.039 INCHES MINIMUM AND 1.051 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROSILICONE CLASS FQ
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER1.039 INCHES MINIMUM AND 1.051 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROSILICONE CLASS FQ
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 4
1.045IDX0.040W COMPOUND L677-70Reference document
Same NSN cross-reference
Reference document — Secondary reference
1.045IDX0.040W COMPOUND TH-1057Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1.045IDX0.040,W COMPOUND F80Reference document
Same NSN cross-reference
Reference document — Secondary reference
1.045IDX0.040W COMPOUND 1393-70Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1.045IDX0.040W COMPOUND 11647?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1.045IDX0.040W COMPOUND 11647?
1.045IDX0.040W COMPOUND 11647 is a O-RING.
What parts can replace 1.045IDX0.040W COMPOUND 11647?
There are 4 known substitutes for 1.045IDX0.040W COMPOUND 11647: 1.045IDX0.040W COMPOUND L677-70, 1.045IDX0.040W COMPOUND TH-1057, 1.045IDX0.040,W COMPOUND F80 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1.045IDX0.040W COMPOUND 11647?
1.045IDX0.040W COMPOUND 11647 is cataloged in the U.S. Government catalog under NSN 5331-01-030-1828. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1.045IDX0.040W COMPOUND 11647