PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1-S-100-093
1-S-100-093 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The STUD,SNAPSLIDE FASTENER is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY STUD, neck_length: 0.055 INCHES NOMINAL IN, stud_length: 0.363 INCHES NOMINAL IN, shank_length: 0.093 INCHES NOMINAL IN, neck_diameter: 0.125 INCHES NOMINAL IN, shank_diameter: 0.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-01-081-6222, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-S-100-093
NSN: 5325-01-081-6222
FSC: 5325
CAGE: 80813 — DIMCOGRAY CORPORATION DBA DIMCO-GRAY COMPANY (USA)
SPECIFICATIONS
materialCOPPER ALLOY STUD
neck_length0.055 INCHES NOMINAL IN
stud_length0.363 INCHES NOMINAL IN
shank_length0.093 INCHES NOMINAL IN
neck_diameter0.125 INCHES NOMINAL IN
shank_diameter0.125 INCHES NOMINAL IN
shoulder_length0.090 INCHES NOMINAL IN
largest_diameter0.187 INCHES NOMINAL IN
shoulder_diameter0.187 INCHES NOMINAL IN
surface_treatmentNICKEL STUD
snapslide_stud_styleSTUD
material_document_and_classificationQQ-B-626,CMPSN22,TEM+1/2H FED SPEC SINGLE MATERIAL RESPONSE STUD
NSN5325-01-081-6222
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1-S-100-093 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: NICKEL OVERALL
•
SNAPSLIDE STUD STYLE: STUD
•
MATERIAL: COPPER ALLOY 360 OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-N-290 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,1/2 H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NECK LENGTH: 0.043 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
•
NECK DIAMETER: 0.122 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
•
SHANK LENGTH: 0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTNICKEL OVERALL
SNAPSLIDE STUD STYLESTUD
MATERIALCOPPER ALLOY 360 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-N-290 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626,1/2 H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NECK LENGTH0.043 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
NECK DIAMETER0.122 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
SHANK LENGTH0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
SHOULDER DIAMETER0.188 INCHES NOMINAL IN
LARGEST DIAMETER0.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
612-00Interchangeable
interchangeable cross-reference
interchangeable
BA10104-14Interchangeable
interchangeable cross-reference
interchangeable
61201 20Interchangeable
interchangeable cross-reference
interchangeable
555844Interchangeable
interchangeable cross-reference
interchangeable
C1100-20Interchangeable
interchangeable cross-reference
interchangeable
F2-0532-001-1-K20-O-PInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1-S-100-093?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-S-100-093?
1-S-100-093 is a STUD,SNAPSLIDE FASTENER.
What parts can replace 1-S-100-093?
There are 19 known substitutes for 1-S-100-093: 612-00, BA10104-14, 61201 20 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1-S-100-093?
1-S-100-093 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-01-081-6222. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-S-100-093

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026