PartsTable
Technical Data Sheet
Download PDF

1-895083-27 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1-895083-27: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.093 INCHES NOMINAL IN, outside_diameter: 0.158 INCHES NOMINAL IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: CADMIUM OVERALL, material_thickness: 0.031 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-639-5001, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-895083-27
NSN: 5310-00-639-5001
FSC: 5310 — Nuts and Washers
CAGE: 88818 — KEARFOTT CORPORATION DIV GUIDANCE AND NAVIGATION DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.093 INCHES NOMINAL IN
outside_diameter0.158 INCHES NOMINAL IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentCADMIUM OVERALL
material_thickness0.031 INCHES NOMINAL IN
NSN5310-00-639-5001
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1-895083-27 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
OUTSIDE DIAMETER: 0.158 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.093 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
OUTSIDE DIAMETER0.158 INCHES NOMINAL IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
HOLE DIAMETER0.093 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
FFW84AReference document
Same NSN cross-reference
Reference document — Identification reference
8526941Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
47-3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 1-895083-27?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-895083-27?
1-895083-27 is a WASHER,LOCK.
What parts can replace 1-895083-27?
There are 3 known substitutes for 1-895083-27: FFW84A, 8526941, 47-3. Substitute compatibility should be verified for your specific system.
What is the NSN for 1-895083-27?
1-895083-27 is cataloged in the U.S. Government catalog under NSN 5310-00-639-5001. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-895083-27

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.