PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1-7N16
1-7N16 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The NOZZLE,SPRAY,FLUID-EMULSION is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, spray_type: FULL CONE, overall_length: 2.094 INCHES NOMINAL IN, orifice_diameter: 1.000 INCHES NOMINAL IN, inlet_connection_type: THREADED, inlet_thread_location: INTERNAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-177-1018, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-7N16
NSN: 4730-01-177-1018
FSC: 4730
CAGE: 82247 — SPRAYING SYSTEMS CO (USA)
SPECIFICATIONS
materialCOPPER ALLOY
spray_typeFULL CONE
overall_length2.094 INCHES NOMINAL IN
orifice_diameter1.000 INCHES NOMINAL IN
inlet_connection_typeTHREADED
inlet_thread_locationINTERNAL
NSN4730-01-177-1018
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 1-7N16 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INLET THREAD LOCATION: INTERNAL
•
ORIFICE DIAMETER: 1.000 INCHES NOMINAL IN
•
SPRAY TYPE: FULL CONE
•
MATERIAL: COPPER ALLOY
•
INLET CONNECTION TYPE: THREADED
TECHNICAL CHARACTERISTICS (FLIS)
INLET THREAD LOCATIONINTERNAL
OVERALL LENGTH2.094 INCHES NOMINAL IN
ORIFICE DIAMETER1.000 INCHES NOMINAL IN
SPRAY TYPEFULL CONE
MATERIALCOPPER ALLOY
INLET CONNECTION TYPETHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
26011-1Interchangeable
interchangeable cross-reference
interchangeable
ML131Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1-7N16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-7N16?
1-7N16 is a NOZZLE,SPRAY,FLUID-EMULSION.
What parts can replace 1-7N16?
There are 2 known substitutes for 1-7N16: 26011-1, ML131. Substitute compatibility should be verified for your specific system.
What is the NSN for 1-7N16?
1-7N16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-177-1018. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-7N16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026