PartsTable
Technical Data Sheet
PartsTable / MRO / 1-70-100
1-70-100 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The WIRING HARNESS,BRANCHED is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, body_width: 0.937 INCHES NOMINAL IN, head_style: HEXAGON, body_height: 1.125 INCHES NOMINAL IN, body_length: 1.375 INCHES NOMINAL IN, head_height: 0.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-038-2024, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1-70-100
NSN: 5306-00-038-2024
FSC: 5306
CAGE: 09973 — TRI-DIM FILTER CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_width0.937 INCHES NOMINAL IN
head_styleHEXAGON
body_height1.125 INCHES NOMINAL IN
body_length1.375 INCHES NOMINAL IN
head_height0.375 INCHES NOMINAL IN
terminal_typeWIRE LEAD
thread_length1.500 INCHES MINIMUM IN
inclosure_typeHERMETICALLY SEALED
overall_length3.719 INCHES NOMINAL IN
branch_quantity4
fastener_length2.000 INCHES NOMINAL IN
NSN5306-00-038-2024
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1-70-100 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.375 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NONSTANDARD THREAD PITCH DIAMETER: +0.4460 TO 0.5500 INCHES IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
FEATURES PROVIDED: FINISHED HEAD
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH BETWEEN FLATS0.750 INCHES NOMINAL IN
HEAD HEIGHT0.375 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
THREAD DIRECTIONRIGHT-HAND
NONSTANDARD THREAD PITCH DIAMETER+0.4460 TO 0.5500 INCHES IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD DIAMETER0.500 INCHES IN
FEATURES PROVIDEDFINISHED HEAD
MINIMUM TENSILE STRENGTH85000 POUNDS PER SQUARE INCH LBS
FASTENER LENGTH2.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
170-1AInterchangeable
interchangeable cross-reference
interchangeable
C218266-5Interchangeable
interchangeable cross-reference
interchangeable
0C218266-4Interchangeable
interchangeable cross-reference
interchangeable
1102590PC1Interchangeable
interchangeable cross-reference
interchangeable
1-70-100Interchangeable
interchangeable cross-reference
interchangeable
6635-7590-3000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1-70-100?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-70-100?
1-70-100 is a WIRING HARNESS,BRANCHED. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1-70-100?
There are 10 known substitutes for 1-70-100: 170-1A, C218266-5, 0C218266-4 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1-70-100?
1-70-100 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-038-2024. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-70-100

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026