PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1-6T
1-6T ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,ELECTRON TUBE is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: STEEL, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.060 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-0153, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-6T
NSN: 5340-00-598-0153
FSC: 5340
CAGE: 85480 — BRADY UNITED STATES (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
materialSTEEL
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.060 INCHES NOMINAL IN
loop_inside_diameter0.984 INCHES NOMINAL IN
material_document_and_classificationF-10001,E I DUPONT DE NEMOURS AND CO INC MFR REF SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.111 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.908 INCHES NOMINAL IN
NSN5340-00-598-0153
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1-6T MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.203 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.908 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.203 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON BAND
STYLE DESIGNATORSINGLE LOOP
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.000 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.908 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
OVERALL WIDTH0.500 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.111 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
6Upgraded Successor
successor cross-reference
successor
91-98005-021Upgraded Successor
successor cross-reference
successor
F6NY-1000BKUpgraded Successor
successor cross-reference
successor
1-6TUpgraded Successor
successor cross-reference
successor
803BUpgraded Successor
successor cross-reference
successor
00716493380078Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1-6T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-6T?
1-6T is a RETAINER,ELECTRON TUBE.
What parts can replace 1-6T?
There are 22 known substitutes for 1-6T: 6, 91-98005-021, F6NY-1000BK and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1-6T?
1-6T is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-0153. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-6T

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026