PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1-6S0
1-6S0 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The FLANGE,PIPE is a the manufacturer industrial component. Key specifications include material: STEEL, thickness: 1.000 INCHES NOMINAL IN, neck_height: 0.562 INCHES NOMINAL IN, socket_depth: 1.313 INCHES NOMINAL IN, flange_diameter: 11.000 INCHES NOMINAL IN, socket_diameter: 5.047 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-844-3267, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-6S0
NSN: 4730-00-844-3267
FSC: 4730
CAGE: 12494 — ASSOCIATED STEEL COMPANY (USA)
SPECIFICATIONS
materialSTEEL
thickness1.000 INCHES NOMINAL IN
neck_height0.562 INCHES NOMINAL IN
socket_depth1.313 INCHES NOMINAL IN
flange_diameter11.000 INCHES NOMINAL IN
socket_diameter5.047 INCHES NOMINAL IN
style_designatorROUND, ONE BOLT HOLE CIRCLE
bolt_hole_diameter0.750 INCHES NOMINAL IN
bolt_hole_quantity8
raised_face_height0.062 INCHES NOMINAL IN
bolt_circle_diameter9.500 INCHES NOMINAL IN
flange_section_styleRAISED FACE, SOCKET NECK
NSN4730-00-844-3267
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 1-6S0 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RAISED FACE DIAMETER: 8.500 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
THICKNESS: 1.000 INCHES NOMINAL IN
•
FLANGE DIAMETER: 11.000 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 9.500 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 13 TABLE AND 14 TABLE
•
SPECIFICATION/STANDARD DATA: 81349-MIL-F-18180 GOVERNMENT SPECIFICATION
•
OPERATING PRESSURE AND TYPE: 150.0 POUNDS PER SQUARE INCH (PSI) GAS MAXIMUM REQUIRED AND 150.0 POUNDS PER SQUARE INCH (PSI) OIL MAXIMUM REQUIRED AND 150.0 POUNDS PER SQUARE INCH (PSI) WATER MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
TECHNICAL CHARACTERISTICS (FLIS)
RAISED FACE DIAMETER8.500 INCHES NOMINAL IN
MATERIALSTEEL
THICKNESS1.000 INCHES NOMINAL IN
FLANGE DIAMETER11.000 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER9.500 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA13 TABLE AND 14 TABLE
SPECIFICATION/STANDARD DATA81349-MIL-F-18180 GOVERNMENT SPECIFICATION
OPERATING PRESSURE AND TYPE150.0 POUNDS PER SQUARE INCH (PSI) GAS MAXIMUM REQUIRED AND 150.0 POUNDS PER SQUARE INCH (PSI) OIL MAXIMUM REQUIRED AND 150.0 POUNDS PER SQUARE INCH (PSI) WATER MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
STYLE DESIGNATORROUND, ONE BOLT HOLE CIRCLE
RAISED FACE HEIGHT0.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
16-8INInterchangeable
interchangeable cross-reference
interchangeable
M18180/3-13A01Interchangeable
interchangeable cross-reference
interchangeable
50Interchangeable
interchangeable cross-reference
interchangeable
MIL-F-18180CInterchangeable
interchangeable cross-reference
interchangeable
B16-5-1961Interchangeable
interchangeable cross-reference
interchangeable
M18180/1-027A01AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1-6S0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-6S0?
1-6S0 is a FLANGE,PIPE.
What parts can replace 1-6S0?
There are 11 known substitutes for 1-6S0: 16-8IN, M18180/3-13A01, 50 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1-6S0?
1-6S0 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-844-3267. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-6S0

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026