PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1-5653
1-5653 ✓ Verified by PartsTable
Esselte · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

SHIPPING AND STORAGE CONTAINER,F. Key specifications include material: CORK OVERALL, body_width: 1.625 INCHES NOMINAL IN, head_style: KNURLED NO. 1, body_height: 1.625 INCHES NOMINAL IN, body_length: 3.000 INCHES NOMINAL IN, head_height: 0.122 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-204-0316, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-5653
NSN: 5340-00-204-0316
FSC: 5340
CAGE: 72804 — EASTERN CO THE (USA)
SPECIFICATIONS
materialCORK OVERALL
body_width1.625 INCHES NOMINAL IN
head_styleKNURLED NO. 1
body_height1.625 INCHES NOMINAL IN
body_length3.000 INCHES NOMINAL IN
head_height0.122 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
thread_class2A A
handle_height2.000 INCHES NOMINAL IN
head_diameter0.200 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
hole_diameter0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.938 INCHES NOMINAL IN
thread_length0.500 INCHES MINIMUM IN
NSN5340-00-204-0316
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1-5653 MFR: Esselte ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHAFT ACCOMMODATION STYLE: SQUARE
•
STYLE DESIGNATOR: L
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
HANDLE HEIGHT: 2.000 INCHES NOMINAL IN
•
HANDLE CLEARANCE: 1.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SHAFT ACCOMMODATION STYLESQUARE
SPECIAL FEATURESTHD HOLE 12-24 NC TAPPED IN HEAD FOR SETSCREW
STYLE DESIGNATORL
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OVERALL
HANDLE HEIGHT2.000 INCHES NOMINAL IN
OVERALL LENGTH4.312 INCHES NOMINAL IN
HANDLE CLEARANCE1.188 INCHES NOMINAL IN
HEAD DIAMETER0.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
15653Interchangeable
interchangeable cross-reference
interchangeable
3216905REVAPC34Interchangeable
interchangeable cross-reference
interchangeable
HP80460N6REVAPC11Interchangeable
interchangeable cross-reference
interchangeable
575-4900-1487472REVAPC11Interchangeable
interchangeable cross-reference
interchangeable
S3S14520000Interchangeable
interchangeable cross-reference
interchangeable
31491Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1-5653?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-5653?
1-5653 is a SHIPPING AND STORAGE CONTAINER,F manufactured by Esselte.
What parts can replace 1-5653?
There are 8 known substitutes for 1-5653: 15653, 3216905REVAPC34, HP80460N6REVAPC11 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1-5653?
1-5653 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-204-0316. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-5653

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026