PartsTable
Technical Data Sheet
Download PDF

1-3645 — SCREW,MACHINE

✓ Government record, cited
Sandberg · BOLT SCREW
PRODUCT OVERVIEW

1-3645: SCREW,MACHINE.

With just one USB-C connection to your laptop Sandberg USB-C 13-in-1 Travel Dock gives you the possibility of connecting all your gear: •4 USB ports for mouse, keyboard and external hard drive, for instance •3 monitor connectors, respectively 2xHDMI and 1xVGA with the possibility of connecting 3 screens simultaneously •Ethernet port for extremely fast Gigabit network •Audio port for headset and microphone •Card reader for memory card •Power connector for full strength USB-C power supply up to 100W •USB-C data connector This part is cataloged in the U.S. Government catalog under NSN 5306-00-225-9088, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
1-3645
NSN: 5306-00-225-9088
NIINs: 002259088, 009789790, 013447393
FSC: 5306 — Bolts
CAGE: 35510 — PRESTOLITE ELECTRIC INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
thread_class2A A
thread_length0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
first_end_styleSLOTTED
pin_grip_length0.795 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN
second_end_styleSQUARE
special_features0.050 IN. W BY 0.015 IN. DEEP RELIEF END OF THD AND 0.031 IN. W GR0VE 0.391 IN. FROM THREADED END IN
thread_directionRIGHT-HAND
first_end_locationSHANK END
pin_overall_length0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN
nominal_thread_size0.164 INCHES IN
first_end_slot_depth0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
NSN5306-00-225-9088
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1-3645 · Sandberg ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.739 INCHES MINIMUM IN
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
FEATURES PROVIDED: FINISHED HEAD
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
FASTENER LENGTH0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.739 INCHES MINIMUM IN
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE J429 ASSN STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
FEATURES PROVIDEDFINISHED HEAD
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 8
M2001NReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
0251562Reference document
Same NSN cross-reference
Reference document — Secondary reference
60-5-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-S-85Reference document
Same NSN cross-reference
Reference document — Identification reference
5306002259088Reference document
Same NSN cross-reference
Reference document — Informative reference only
MS90726-33Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1-3645?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-3645?
1-3645 is a SCREW,MACHINE manufactured by Sandberg.
What parts can replace 1-3645?
There are 8 known substitutes for 1-3645: M2001N, 0251562, 60-5-7 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1-3645?
1-3645 is cataloged in the U.S. Government catalog under NSN 5306-00-225-9088. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-3645