PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1-300-234-01
1-300-234-01 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL SPRING, seal_width: 0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN, construction: SOLID, housing_bore_diameter: 0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN, accommodated_shaft_diameter: 0.495 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN, cross-sectional_shape_style: SINGLE LIP. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-855-8361, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-300-234-01
NSN: 5330-00-855-8361
FSC: 5330
CAGE: 99193 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - PHOENIX (USA)
SPECIFICATIONS
materialSTEEL SPRING
seal_width0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
constructionSOLID
housing_bore_diameter0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
accommodated_shaft_diameter0.495 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-00-855-8361
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1-300-234-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL INTERNALLY MOLDED-IN REINFORCEMENT
•
CONSTRUCTION: SOLID
•
ACCOMMODATED SHAFT DIAMETER: 0.495 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
SEAL WIDTH: 0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL INTERNALLY MOLDED-IN REINFORCEMENT
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CONSTRUCTIONSOLID
MATERIALSTEEL SPRING
ACCOMMODATED SHAFT DIAMETER0.495 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
HOUSING BORE DIAMETER0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
SEAL WIDTH0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
4238Interchangeable
interchangeable cross-reference
interchangeable
5308111Interchangeable
interchangeable cross-reference
interchangeable
PL19D4135Interchangeable
interchangeable cross-reference
interchangeable
M522G4Interchangeable
interchangeable cross-reference
interchangeable
R2556BInterchangeable
interchangeable cross-reference
interchangeable
3120011212809Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1-300-234-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-300-234-01?
1-300-234-01 is a SEAL,PLAIN.
What parts can replace 1-300-234-01?
There are 14 known substitutes for 1-300-234-01: 4238, 5308111, PL19D4135 and 11 more. Substitute compatibility should be verified for your specific system.
Is 1-300-234-01 still available?
1-300-234-01 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-300-234-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026