PartsTable
Technical Data Sheet
Download PDF

1-300-182-02 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1-300-182-02: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include peripheral_diameter: 1.324 INCHES MINIMUM AND 1.328 INCHES MAXIMUM IN, center_hole_diameter: 1.150 INCHES MINIMUM AND 1.154 INCHES MAXIMUM IN, cross-sectional_height: 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, cross-sectional_shape_style: SPECIAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-110-8521, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-300-182-02
NSN: 5330-00-110-8521
FSC: 5330 — Packing and Gasket Materials
CAGE: 99193 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - PHOENIX (USA)
SPECIFICATIONS
peripheral_diameter1.324 INCHES MINIMUM AND 1.328 INCHES MAXIMUM IN
center_hole_diameter1.150 INCHES MINIMUM AND 1.154 INCHES MAXIMUM IN
cross-sectional_height0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
cross-sectional_shape_styleSPECIAL
NSN5330-00-110-8521
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1-300-182-02 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 1.324 INCHES MINIMUM AND 1.328 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.150 INCHES MINIMUM AND 1.154 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER1.324 INCHES MINIMUM AND 1.328 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.150 INCHES MINIMUM AND 1.154 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
1-300-182-01Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1-300-182Reference document
Same NSN cross-reference
Reference document — Secondary reference
E1057Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1-300-182-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-300-182-02?
1-300-182-02 is a PACKING,PREFORMED.
What parts can replace 1-300-182-02?
There are 3 known substitutes for 1-300-182-02: 1-300-182-01, 1-300-182, E1057. Substitute compatibility should be verified for your specific system.
What is the NSN for 1-300-182-02?
1-300-182-02 is cataloged in the U.S. Government catalog under NSN 5330-00-110-8521. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-300-182-02