1-300-151 — SEAL,PLAIN

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

1-300-151: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, seal_width: 0.058 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN, temp_rating: -65.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF, construction: SOLID, housing_bore_diameter: 0.562 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN, accommodated_shaft_diameter: 0.453 INCHES MINIMUM AND 0.463 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-975-0245, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

1-300-151

NSN: 5330-00-975-0245
FSC: 5330 — Packing and Gasket Materials
CAGE: 99193 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - PHOENIX (USA)

SPECIFICATIONS

material	STEEL OVERALL
seal_width	0.058 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
temp_rating	-65.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
construction	SOLID
housing_bore_diameter	0.562 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN
accommodated_shaft_diameter	0.453 INCHES MINIMUM AND 0.463 INCHES MAXIMUM IN
material_document_and_classification	AMS5528 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN	5330-00-975-0245

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -65.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF

•

SEAL WIDTH: 0.058 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN

•

HOUSING BORE DIAMETER: 0.562 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS5528 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

ACCOMMODATED SHAFT DIAMETER: 0.453 INCHES MINIMUM AND 0.463 INCHES MAXIMUM IN

•

MATERIAL: STEEL OVERALL

•

CONSTRUCTION: SOLID

TECHNICAL CHARACTERISTICS

TEMP RATING	-65.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
SEAL WIDTH	0.058 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
HOUSING BORE DIAMETER	0.562 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5528 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
ACCOMMODATED SHAFT DIAMETER	0.453 INCHES MINIMUM AND 0.463 INCHES MAXIMUM IN
END ITEM IDENTIFICATION	W/S: TF40B GAS TURBVINE SYSTEMS; HELICOPTER, COBRA/TOW, AH SERIES; HELICOPTER, IROQUOIS UH-1; ENGINE, TFF-GA-714A (CH-47); LANDING CRAFT AIR CUSHION (LCAC); ENGINE, T700-GE-700 (UH-60 & EH-60A); ENGINE, T55-L-714 (CH-47/MH-47E) A
MATERIAL	STEEL OVERALL
CONSTRUCTION	SOLID

SUBSTITUTES & CROSS-REFERENCES 3

1-300-151-01Reference document

Same NSN cross-reference

Reference document — Secondary reference

1-300-151 02Reference document

Same NSN cross-reference

Reference document — Secondary reference

A00500Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 1-300-151?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1-300-151?

1-300-151 is a SEAL,PLAIN.

What parts can replace 1-300-151?

There are 3 known substitutes for 1-300-151: 1-300-151-01, 1-300-151 02, A00500. Substitute compatibility should be verified for your specific system.

What is the NSN for 1-300-151?

1-300-151 is cataloged in the U.S. Government catalog under NSN 5330-00-975-0245. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1-300-151 — SEAL,PLAIN

Request a Quote — 1-300-151