PartsTable
Technical Data Sheet
Download PDF

1-223181 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1-223181: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: COTTON AND RUBBER SYNTHETIC OVERALL, outside_diameter: 10.000 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 8.000 INCHES NOMINAL IN, maximum_pressure_rating: 250.0 POUNDS PER SQUARE INCH (PSI) LBS, cross-sectional_thickness: 0.120 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-110-9273, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-223181
NSN: 5330-01-110-9273
NIINs: 011109273, 011474020
FSC: 5330 — Packing and Gasket Materials
CAGE: 54539 — ENERQUIP, LLC (USA)
SPECIFICATIONS
materialCOTTON AND RUBBER SYNTHETIC OVERALL
outside_diameter10.000 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter8.000 INCHES NOMINAL IN
maximum_pressure_rating250.0 POUNDS PER SQUARE INCH (PSI) LBS
cross-sectional_thickness0.120 INCHES NOMINAL IN
cross-sectional_shape_styleCLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
material_document_and_classificationHH-P-151,CL 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-110-9273
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1-223181 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.120 INCHES NOMINAL IN
•
MAXIMUM PRESSURE RATING: 250.0 POUNDS PER SQUARE INCH (PSI) LBS
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-151,CL 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: CLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
•
OUTSIDE DIAMETER: 10.000 INCHES NOMINAL IN
•
APERTURE DIAMETER: 8.000 INCHES NOMINAL IN
•
MATERIAL: COTTON AND RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.120 INCHES NOMINAL IN
MAXIMUM PRESSURE RATING250.0 POUNDS PER SQUARE INCH (PSI) LBS
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-151,CL 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLECLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
OUTSIDE DIAMETER10.000 INCHES NOMINAL IN
APERTURE DIAMETER8.000 INCHES NOMINAL IN
MATERIALCOTTON AND RUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
6-203361PC2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1-223181?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-223181?
1-223181 is a GASKET.
What parts can replace 1-223181?
There is 1 known substitute for 1-223181: 6-203361PC2. Substitute compatibility should be verified for your specific system.
What is the NSN for 1-223181?
1-223181 is cataloged in the U.S. Government catalog under NSN 5330-01-110-9273. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-223181

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.