PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1-2 13X1IN
1-2 13X1IN ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: SQUARE, head_height: 0.308 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.000 INCHES MAXIMUM IN, fastener_length: 1.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-550-5028, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-2 13X1IN
NSN: 5306-00-550-5028
FSC: 5306
CAGE: 47562 — GAGE CO THE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleSQUARE
head_height0.308 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN
thread_class2A A
thread_length1.000 INCHES MAXIMUM IN
fastener_length1.000 INCHES NOMINAL IN
hardness_rating95.0 ROCKWELL B MAXIMUM OVERALL
thread_directionRIGHT-HAND
features_providedUNFINISHED HEAD
surface_treatmentCADMIUM OR ZINC OVERALL
width_between_flats0.725 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
nominal_thread_diameter0.500 INCHES IN
NSN5306-00-550-5028
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1-2 13X1IN · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
HEAD STYLE: SQUARE
•
THREAD LENGTH: 1.000 INCHES MAXIMUM IN
•
WIDTH BETWEEN FLATS: 0.725 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
FEATURES PROVIDED: UNFINISHED HEAD
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
HEAD STYLESQUARE
THREAD LENGTH1.000 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS0.725 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.500 INCHES IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
FEATURES PROVIDEDUNFINISHED HEAD
THREAD QUANTITY PER INCH13
THREAD CLASS2A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
111195Upgraded Successor
successor cross-reference
successor
FF-B-575Upgraded Successor
successor cross-reference
successor
V80AUpgraded Successor
successor cross-reference
successor
1103024Upgraded Successor
successor cross-reference
successor
0904935-4Upgraded Successor
successor cross-reference
successor
MS35355-127Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1-2 13X1IN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-2 13X1IN?
1-2 13X1IN is a BOLT,MACHINE.
What parts can replace 1-2 13X1IN?
There are 24 known substitutes for 1-2 13X1IN: 111195, FF-B-575, V80A and 21 more. Substitute compatibility should be verified for your specific system.
Is 1-2 13X1IN still available?
1-2 13X1IN is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-2 13X1IN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026