PartsTable
Technical Data Sheet
Download PDF

1-160-047-02 NON-ASBESTOS — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1-160-047-02 NON-ASBESTOS: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.313 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.490 INCHES NOMINAL IN, special_features: CONTAINS NO ASBESTOS, style_designator: NON-CIRCULAR, aperture_diameter: 1.060 INCHES NOMINAL IN, bolt_circle_diameter: 1.810 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-374-9260, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-160-047-02 NON-ASBESTOS
NSN: 5330-01-374-9260
FSC: 5330 — Packing and Gasket Materials
CAGE: 99193 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - PHOENIX (USA)
SPECIFICATIONS
hole_diameter0.313 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.490 INCHES NOMINAL IN
special_featuresCONTAINS NO ASBESTOS
style_designatorNON-CIRCULAR
aperture_diameter1.060 INCHES NOMINAL IN
bolt_hole_quantity2
bolt_circle_diameter1.810 INCHES NOMINAL IN
outside_corner_radius0.340 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
side_radius_from_gasket_center0.810 INCHES NOMINAL IN
NSN5330-01-374-9260
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1-160-047-02 NON-ASBESTOS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 0.810 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
APERTURE DIAMETER: 1.060 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 2
•
BOLT CIRCLE DIAMETER: 1.810 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER0.810 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL WIDTH2.490 INCHES NOMINAL IN
APERTURE DIAMETER1.060 INCHES NOMINAL IN
BOLT HOLE QUANTITY2
BOLT CIRCLE DIAMETER1.810 INCHES NOMINAL IN
SPECIAL FEATURESCONTAINS NO ASBESTOS
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
OUTSIDE CORNER RADIUS0.340 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
1-300-688-01Reference document
Same NSN cross-reference
Reference document — Secondary reference
1-160-047-02Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1-160-047-02 NON-ASBESTOS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-160-047-02 NON-ASBESTOS?
1-160-047-02 NON-ASBESTOS is a GASKET.
What parts can replace 1-160-047-02 NON-ASBESTOS?
There are 2 known substitutes for 1-160-047-02 NON-ASBESTOS: 1-300-688-01, 1-160-047-02. Substitute compatibility should be verified for your specific system.
What is the NSN for 1-160-047-02 NON-ASBESTOS?
1-160-047-02 NON-ASBESTOS is cataloged in the U.S. Government catalog under NSN 5330-01-374-9260. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-160-047-02 NON-ASBESTOS