PartsTable
Technical Data Sheet
Download PDF

1-14010-ITM 217 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1-14010-ITM 217: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, peripheral_diameter: 3.012 INCHES NOMINAL IN, center_hole_diameter: 2.710 INCHES MINIMUM AND 2.758 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, end_item_identification: 4610-01-234-2196. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-326-0785, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-14010-ITM 217
NSN: 5330-01-326-0785
FSC: 5330 — Packing and Gasket Materials
CAGE: 11836 — NATIONAL OILWELL (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
peripheral_diameter3.012 INCHES NOMINAL IN
center_hole_diameter2.710 INCHES MINIMUM AND 2.758 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identification4610-01-234-2196
NSN5330-01-326-0785
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1-14010-ITM 217 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 3.012 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 2.710 INCHES MINIMUM AND 2.758 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
PERIPHERAL DIAMETER3.012 INCHES NOMINAL IN
CENTER HOLE DIAMETER2.710 INCHES MINIMUM AND 2.758 INCHES MAXIMUM IN
END ITEM IDENTIFICATION4610-01-234-2196
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
AS586-232Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1-14010-ITM 217?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-14010-ITM 217?
1-14010-ITM 217 is a PACKING,PREFORMED.
What parts can replace 1-14010-ITM 217?
There is 1 known substitute for 1-14010-ITM 217: AS586-232. Substitute compatibility should be verified for your specific system.
What is the NSN for 1-14010-ITM 217?
1-14010-ITM 217 is cataloged in the U.S. Government catalog under NSN 5330-01-326-0785. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-14010-ITM 217