PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1-14-49
1-14-49 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include part_name_assigned_by_controlling_agency: REPAIR KIT SPLINT INJURY IMMOBILIZATION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-029-8525, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-14-49
NSN: 5340-00-029-8525
FSC: 5340
CAGE: 95019 — DANA CORP SPICER TRANSMISSION DIV (USA)
SPECIFICATIONS
special_featuresCOMPLETEEMERGENCY INIT SET; C/O FULL BODY MATTRESS, SMALL EMERGENCY UNIT SET, BACK PACKS; USED F/EMERGENCY INJURY IMMOBILIZATION
general_characteristics_item_descriptionLIGHT WEIGHT, EFFECTIVE STURDY HARD PLASTIC BODIES PUMP; AIR PUMPING VOLUME OF 0.02 CUBIC FOOT PER STROKE; FOR USE W/VACUUM SPLINT IN INJURY IMMOBILIZATION; MANUAL VACUUM PUMP
part_name_assigned_by_controlling_agencyREPAIR KIT SPLINT INJURY IMMOBILIZATION
NSN5340-00-029-8525
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1-14-49 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLOSED END OVERALL DIAMETER: 1.313 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
OPEN END INSIDE DIAMETER: 1.222 INCHES MINIMUM AND 1.226 INCHES MAXIMUM IN
•
LENGTH UNDER SHOULDER: 0.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CLOSED END OVERALL DIAMETER1.313 INCHES NOMINAL IN
MATERIALSTEEL
OPEN END INSIDE DIAMETER1.222 INCHES MINIMUM AND 1.226 INCHES MAXIMUM IN
LENGTH UNDER SHOULDER0.438 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
11449Interchangeable
interchangeable cross-reference
interchangeable
R11449Interchangeable
interchangeable cross-reference
interchangeable
5133PL1430605Interchangeable
interchangeable cross-reference
interchangeable
350-RTInterchangeable
interchangeable cross-reference
interchangeable
44174Interchangeable
interchangeable cross-reference
interchangeable
411449001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1-14-49?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-14-49?
1-14-49 is a RESISTOR,VARIABLE,WIRE WOUND,PRE.
What parts can replace 1-14-49?
There are 12 known substitutes for 1-14-49: 11449, R11449, 5133PL1430605 and 9 more. Substitute compatibility should be verified for your specific system.
Is 1-14-49 still available?
1-14-49 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-14-49

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026