PartsTable
Technical Data Sheet
Download PDF

1-126400 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1-126400: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, temp_rating: 70.0 CELSIUS AND 85.0 CELSIUS DEGC, maximum_pressure_rating: 10.0 POUNDS PER SQUARE INCH (PSI) LBS, cross-sectional_thickness: 0.031 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION, material_document_and_classification: MIL-G-12803 F3301-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-917-2738, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-126400
NSN: 5330-00-917-2738
FSC: 5330 — Packing and Gasket Materials
CAGE: 51915 — OLYMPIC CONTROLS CORP (USA)
SPECIFICATIONS
materialPAPER OVERALL
temp_rating70.0 CELSIUS AND 85.0 CELSIUS DEGC
maximum_pressure_rating10.0 POUNDS PER SQUARE INCH (PSI) LBS
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803 F3301-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-917-2738
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1-126400 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: 70.0 CELSIUS AND 85.0 CELSIUS DEGC
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
MAXIMUM PRESSURE RATING: 10.0 POUNDS PER SQUARE INCH (PSI) LBS
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803 F3301-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: PAPER OVERALL
TECHNICAL CHARACTERISTICS
TEMP RATING70.0 CELSIUS AND 85.0 CELSIUS DEGC
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
MAXIMUM PRESSURE RATING10.0 POUNDS PER SQUARE INCH (PSI) LBS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803 F3301-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIALPAPER OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
12445Reference document
Same NSN cross-reference
Reference document — Secondary reference
126400Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1-126400?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-126400?
1-126400 is a GASKET.
What parts can replace 1-126400?
There are 2 known substitutes for 1-126400: 12445, 126400. Substitute compatibility should be verified for your specific system.
What is the NSN for 1-126400?
1-126400 is cataloged in the U.S. Government catalog under NSN 5330-00-917-2738. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-126400