PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1-12600-2
1-12600-2 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

SOCKET,PLUG-IN ELECTRONIC COMPON. Key specifications include material: PLASTIC POLYAMIDE NYLON RETAINER, bore_shape: STRAIGHT, bore_diameter: 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN, overall_width: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-470-8104, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-12600-2
NSN: 3110-00-470-8104
FSC: 3110
CAGE: 80175 — QUICKSET DEFENSE TECHNOLOGIES LLC (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON RETAINER
bore_shapeSTRAIGHT
bore_diameter0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
overall_width0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter1.6245 INCHES MINIMUM AND 1.6250 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodMOLDED
NSN3110-00-470-8104
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1-12600-2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHIELD QUANTITY: 2
•
LOAD DIRECTION: RADIAL
•
BORE SHAPE: STRAIGHT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LUBRICATION MATERIAL: GREASE
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
•
SURFACE FINISH: GROUND
•
RETAINER FABRICATION METHOD: MOLDED
TECHNICAL CHARACTERISTICS (FLIS)
SHIELD QUANTITY2
LOAD DIRECTIONRADIAL
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
LUBRICATION MATERIALGREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
SURFACE FINISHGROUND
RETAINER FABRICATION METHODMOLDED
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL SHIELD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
K35J133Interchangeable
interchangeable cross-reference
interchangeable
61009Interchangeable
interchangeable cross-reference
interchangeable
101-21-11-040Interchangeable
interchangeable cross-reference
interchangeable
E2909PC82Interchangeable
interchangeable cross-reference
interchangeable
31364Interchangeable
interchangeable cross-reference
interchangeable
716-002Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1-12600-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-12600-2?
1-12600-2 is a SOCKET,PLUG-IN ELECTRONIC COMPON.
What parts can replace 1-12600-2?
There are 23 known substitutes for 1-12600-2: K35J133, 61009, 101-21-11-040 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1-12600-2?
1-12600-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-470-8104. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-12600-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026