PartsTable
Technical Data Sheet
Download PDF

1-10945 — SWITCH,FLOW

✓ Government record, cited
Peach · MRO · MRO_GENERAL
PRODUCT OVERVIEW

1-10945: SWITCH,FLOW.

The SWITCH,FLOW is a Peach industrial component. Key specifications include hole_diameter: 0.875 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, terminal_type: WIRE LEAD, mounting_method: INLET CONNECTION AND OUTLET CONNECTION, outside_diameter: 10.000 INCHES NOMINAL IN, aperture_diameter: 7.000 INCHES NOMINAL IN, bolt_circle_diameter: 8.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-138-4621, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1-10945
NSN: 5330-01-138-4621
NIINs: 011384621, 012385802
FSC: 5330 — Packing and Gasket Materials
CAGE: 65586 — CHROMALOX INC DBA CHROMALOX PRECISION HEAT AND CONTROL, INC (USA)
SPECIFICATIONS
hole_diameter0.875 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
terminal_typeWIRE LEAD
mounting_methodINLET CONNECTION AND OUTLET CONNECTION
outside_diameter10.000 INCHES NOMINAL IN
aperture_diameter7.000 INCHES NOMINAL IN
bolt_hole_quantity8
bolt_circle_diameter8.500 INCHES NOMINAL IN
contact_adjustabilityDEACTUATION POINT NOT ADJUSTABLE
contact_action_stimulusDECREASE
contact_stimulus_rating2.20 DEACTUATION POINT NOMINAL GALLONS PER MINUTE
media_for_which_designedLIQUID
cross-sectional_thickness0.063 INCHES NOMINAL IN
NSN5330-01-138-4621
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1-10945 MFR: Peach ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.063 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 10.000 INCHES NOMINAL IN
•
APERTURE DIAMETER: 7.000 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 8
•
BOLT CIRCLE DIAMETER: 8.500 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.875 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.063 INCHES NOMINAL IN
OUTSIDE DIAMETER10.000 INCHES NOMINAL IN
APERTURE DIAMETER7.000 INCHES NOMINAL IN
BOLT HOLE QUANTITY8
BOLT CIRCLE DIAMETER8.500 INCHES NOMINAL IN
HOLE DIAMETER0.875 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 2
155-115625-000PC16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
132-117786-001Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1-10945?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-10945?
1-10945 is a SWITCH,FLOW manufactured by Peach. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1-10945?
There are 2 known substitutes for 1-10945: 155-115625-000PC16, 132-117786-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 1-10945?
1-10945 is cataloged in the U.S. Government catalog under NSN 5330-01-138-4621. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-10945