PartsTable
Technical Data Sheet
Download PDF

1-1062-001 — 1-1062-001

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

1-1062-001: 1-1062-001.

The 1-1062-001 is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, temp_rating: -55.0 CELSIUS AND 125.0 CELSIUS DEGC, outside_diameter: 4.761 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 4.473 INCHES NOMINAL IN, end_item_identification: T-38 AIRCRAFT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-235-9852, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1-1062-001
NSN: 5340-01-235-9852
NIINs: 012359852, 014666149
FSC: 5340 — Hardware, Commercial
CAGE: 10396 — HERCULES INC AEROSPACE DIV BACCHUS WORKS (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
temp_rating-55.0 CELSIUS AND 125.0 CELSIUS DEGC
outside_diameter4.761 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter4.473 INCHES NOMINAL IN
end_item_identificationT-38 AIRCRAFT
cross-sectional_thickness4.761 INCHES MAXIMUM IN
cross-sectional_shape_styleMETAL AND SYNTHETIC RUBBER
NSN5340-01-235-9852
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1-1062-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.030 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL: STEEL COMP 321 OVERALL
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
OVERALL WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS0.030 INCHES NOMINAL IN
SPECIAL FEATURESCONTAINS A SILICONE COMPOUND INSERT,INSERT CONTAINS 2 HOLES,0.245 IN DIA IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIALSTEEL COMP 321 OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1-1062-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-1062-001?
1-1062-001 is a 1-1062-001. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 1-1062-001?
1-1062-001 is cataloged in the U.S. Government catalog under NSN 5340-01-235-9852. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-1062-001