PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1-1/4 X 1/2 X 2 0'4" LG
1-1/4 X 1/2 X 2 0'4" LG ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 1-1/4 X 1/2 X 2 0'4" LG is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-9368, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-1/4 X 1/2 X 2 0'4" LG
NSN: 5330-00-171-9368
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
Part Number1-1/4 X 1/2 X 2 0'4" LG
NSN5330-00-171-9368
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1-1/4 X 1/2 X 2 0'4" LG MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM TENSILE STRENGTH: ERR-060
•
LENGTH: 1200.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.500 INCHES NOMINAL IN
•
ENVIRONMENTAL PROTECTION: LIGHT AND WATER RESISTANT
•
MATERIAL: RUBBER SYNTHETIC
•
CROSS-SECTIONAL HEIGHT: 1.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM TENSILE STRENGTHERR-060
LENGTH1200.000 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.500 INCHES NOMINAL IN
ENVIRONMENTAL PROTECTIONLIGHT AND WATER RESISTANT
MATERIALRUBBER SYNTHETIC
CROSS-SECTIONAL HEIGHT1.250 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT1.250 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
NONMETALLIC HARDNESS RATING40.0 MINIMUM SHORE DUROMETER A AND 48.0 MAXIMUM SHORE DUROMETER A
FABRICATION METHODSOLID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
805-1400052 PC3Interchangeable
interchangeable cross-reference
interchangeable
P343-0327-000Interchangeable
interchangeable cross-reference
interchangeable
343-0327-000Interchangeable
interchangeable cross-reference
interchangeable
XC-408Interchangeable
interchangeable cross-reference
interchangeable
C-17-MInterchangeable
interchangeable cross-reference
interchangeable
2112Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1-1/4 X 1/2 X 2 0'4" LG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-1/4 X 1/2 X 2 0'4" LG?
1-1/4 X 1/2 X 2 0'4" LG is a 1-1/4 X 1/2 X 2 0'4" LG.
What parts can replace 1-1/4 X 1/2 X 2 0'4" LG?
There are 32 known substitutes for 1-1/4 X 1/2 X 2 0'4" LG: 805-1400052 PC3, P343-0327-000, 343-0327-000 and 29 more. Substitute compatibility should be verified for your specific system.
Is 1-1/4 X 1/2 X 2 0'4" LG still available?
1-1/4 X 1/2 X 2 0'4" LG is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-1/4 X 1/2 X 2 0'4" LG

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026