PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1-0369-3
1-0369-3 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_length: 33.000 INCHES IN, first_end_style: CHAMFERED, special_features: 3 MARKERS, style_designator: INTERNAL CONNECTORS, conductor_quantity: 11. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3693, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-0369-3
NSN: 5315-00-010-3693
FSC: 5315
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_length33.000 INCHES IN
first_end_styleCHAMFERED
special_features3 MARKERS
style_designatorINTERNAL CONNECTORS
conductor_quantity11
pin_overall_length0.863 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN
pin_overall_diameter0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.010 INCHES NOMINAL IN
cross-sectional_shape_styleROUND
material_document_and_classificationQQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-010-3693
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1-0369-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL LENGTH: 0.863 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN
•
PIN OVERALL DIAMETER: 0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END TAPER LENGTH: 0.010 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL LENGTH0.863 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN
PIN OVERALL DIAMETER0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END TAPER LENGTH0.010 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
357420SInterchangeable
interchangeable cross-reference
interchangeable
8UU0328Interchangeable
interchangeable cross-reference
interchangeable
394017Interchangeable
interchangeable cross-reference
interchangeable
112011Interchangeable
interchangeable cross-reference
interchangeable
1000-0369-3Interchangeable
interchangeable cross-reference
interchangeable
1-0369-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1-0369-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-0369-3?
1-0369-3 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace 1-0369-3?
There are 10 known substitutes for 1-0369-3: 357420S, 8UU0328, 394017 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1-0369-3?
1-0369-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3693. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-0369-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026