PartsTable
Technical Data Sheet
PartsTable / MRO / 1-012-1575
1-012-1575 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CAPACITOR,FIXED,ELECTROLYTIC is a the manufacturer cache protection component designed to preserve data integrity during power loss events in enterprise server and storage controller environments. Key specifications include material: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL, thickness: 0.063 INCHES NOMINAL IN, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 1.000 INCHES NOMINAL IN, body_diameter: 0.375 INCHES NOMINAL IN, hole_diameter: 0.255 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-655-7219, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1-012-1575
NSN: 5310-00-655-7219
FSC: 5310
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL
thickness0.063 INCHES NOMINAL IN
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_length1.000 INCHES NOMINAL IN
body_diameter0.375 INCHES NOMINAL IN
hole_diameter0.255 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
terminal_length1.500 INCHES NOMINAL IN
overall_diameter0.463 INCHES MINIMUM AND 0.483 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
terminal_diameter0.035 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
NSN5310-00-655-7219
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1-012-1575 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-698 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
THICKNESS: 0.063 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
CENTER HOLE SHAPE STYLE: ROUND
•
PERIPHERAL SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 0.463 INCHES MINIMUM AND 0.483 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIALSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-698 FED SPEC ALL MATERIAL RESPONSES OVERALL
THICKNESS0.063 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
CENTER HOLE SHAPE STYLEROUND
PERIPHERAL SHAPE STYLEROUND
OVERALL DIAMETER0.463 INCHES MINIMUM AND 0.483 INCHES MAXIMUM IN
HOLE DIAMETER0.255 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
75NTM82Interchangeable
interchangeable cross-reference
interchangeable
1V0064-00Interchangeable
interchangeable cross-reference
interchangeable
21C1599-22Interchangeable
interchangeable cross-reference
interchangeable
1-012-1575Interchangeable
interchangeable cross-reference
interchangeable
NAS6204-16Interchangeable
interchangeable cross-reference
interchangeable
5306PL1497691Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1-012-1575?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-012-1575?
1-012-1575 is a CAPACITOR,FIXED,ELECTROLYTIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1-012-1575?
There are 16 known substitutes for 1-012-1575: 75NTM82, 1V0064-00, 21C1599-22 and 13 more. Substitute compatibility should be verified for your specific system.
Is 1-012-1575 still available?
1-012-1575 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-012-1575

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026