PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1/2-13UNC-2A X 1 3/4IN

1/2-13UNC-2A X 1 3/4IN — Technical Data Sheet

✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.250 INCHES NOMINAL IN, fastener_length: 1.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5305-01-041-2832, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1/2-13UNC-2A X 1 3/4IN
NSN: 5305-01-041-2832
FSC: 5305
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
thread_class2A A
thread_length1.250 INCHES NOMINAL IN
fastener_length1.750 INCHES NOMINAL IN
hardness_rating32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
special_featuresMIL-DTL-1222 SPECIFICALLY STATED GRADES 8, 4340 AND A574 FASTENERS SHALL NOT BE COATED WITH ANODIC ZINC, METALLIC ALUMIMUM, ZINC CONTAINING PRIMER.
thread_directionRIGHT-HAND
width_between_flats0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
nominal_thread_diameter0.500 INCHES IN
minimum_tensile_strength150000 POUNDS PER SQUARE INCH LBS
NSN5305-01-041-2832
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1/2-13UNC-2A X 1 3/4IN · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD STYLE: HEXAGON
•
DEPARTURE FROM CITED DESIGNATOR: MATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS
•
MATERIAL: NICKEL ALLOY OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD LENGTH: 1.250 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN
•
WIDTH BETWEEN FLATS: 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
TECHNICAL CHARACTERISTICS
THREAD DIRECTIONRIGHT-HAND
HEAD STYLEHEXAGON
DEPARTURE FROM CITED DESIGNATORMATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS
MATERIALNICKEL ALLOY OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD LENGTH1.250 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.500 INCHES IN
THREAD QUANTITY PER INCH13
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-281,CLASS 4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
1/2-13UNC-2A X 3L1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MIL-DTL-1222 TYI GR400L1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1/2-13UNC-2A X 3InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
M1222RN8C228GHNNInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MIL-DTL-1222InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
845-4788655 ITEM 16L1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1/2-13UNC-2A X 1 3/4IN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1/2-13UNC-2A X 1 3/4IN?
1/2-13UNC-2A X 1 3/4IN is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 1/2-13UNC-2A X 1 3/4IN?
There are 20 known substitutes for 1/2-13UNC-2A X 1 3/4IN: 1/2-13UNC-2A X 3L1, MIL-DTL-1222 TYI GR400L1, 1/2-13UNC-2A X 3 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1/2-13UNC-2A X 1 3/4IN?
1/2-13UNC-2A X 1 3/4IN is cataloged in the Federal Logistics Information System under NSN 5305-01-041-2832. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1/2-13UNC-2A X 1 3/4IN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026