PartsTable
Technical Data Sheet

1/0-19W — WIRE,ELECTRICAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1/0-19W: WIRE,ELECTRICAL.

The WIRE,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: COPPER CORE CONDUCTOR ALL CONDUCTORS, hole_diameter: 0.188 INCHES NOMINAL IN, conductor_form: STRANDED ALL CONDUCTORS, overall_height: 0.625 INCHES NOMINAL IN, special_features: 1/0-19/W SIZE; INDIVIDUAL WIRE SIZE 0.0745 IN. IN, style_designator: PAN TOP COUNTERBORED.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-144-9702, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1/0-19W
NSN: 5340-01-144-9702
NIINs: 011449702, 015473038
FSC: 5340 — Hardware, Commercial
CAGE: 70485 — ATLANTIC INDIA RUBBER CO INC (USA)
SPECIFICATIONS
materialCOPPER CORE CONDUCTOR ALL CONDUCTORS
hole_diameter0.188 INCHES NOMINAL IN
conductor_formSTRANDED ALL CONDUCTORS
overall_height0.625 INCHES NOMINAL IN
special_features1/0-19/W SIZE; INDIVIDUAL WIRE SIZE 0.0745 IN. IN
style_designatorPAN TOP COUNTERBORED
first_counterbore_depth0.344 INCHES NOMINAL IN
first_counterbore_diameter0.500 INCHES NOMINAL IN
outside/top_flange_diameter1.500 INCHES NOMINAL IN
NSN5340-01-144-9702
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1/0-19W MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE/TOP FLANGE DIAMETER: 1.500 INCHES NOMINAL IN
•
FIRST COUNTERBORE DIAMETER: 0.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: PAN TOP COUNTERBORED
•
FIRST COUNTERBORE DEPTH: 0.344 INCHES NOMINAL IN
•
MATERIAL: RUBBER
•
HOLE DIAMETER: 0.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.625 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER1.500 INCHES NOMINAL IN
FIRST COUNTERBORE DIAMETER0.500 INCHES NOMINAL IN
STYLE DESIGNATORPAN TOP COUNTERBORED
FIRST COUNTERBORE DEPTH0.344 INCHES NOMINAL IN
SPECIAL FEATURESINCLUDES MOLDED IN WASHER
MATERIALRUBBER
HOLE DIAMETER0.188 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
GB505C1WReference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
68A4-C115-2Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1/0-19W?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1/0-19W?
1/0-19W is a WIRE,ELECTRICAL.
What parts can replace 1/0-19W?
There are 2 known substitutes for 1/0-19W: GB505C1W, 68A4-C115-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 1/0-19W?
1/0-19W is cataloged in the U.S. Government catalog under NSN 5340-01-144-9702. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1/0-19W