PartsTable
Technical Data Sheet
Download PDF

1 4110-7 — RING,RETAINING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1 4110-7: RING,RETAINING.

The RING,RETAINING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 0.363 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN, pin_overall_diameter: 0.1250 INCHES NOMINAL IN, first_end_taper_angle: 25.0 DEGREES NOMINAL, first_end_taper_length: 0.015 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-023-3881, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1 4110-7
NSN: 5315-01-023-3881
NIINs: 010233881, 013480456
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length0.363 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN
pin_overall_diameter0.1250 INCHES NOMINAL IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.015 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-01-023-3881
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1 4110-7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.015 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.1250 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 0.363 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.015 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.1250 INCHES NOMINAL IN
PIN OVERALL LENGTH0.363 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
5315010233881Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 1 4110-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1 4110-7?
1 4110-7 is a RING,RETAINING.
What parts can replace 1 4110-7?
There is 1 known substitute for 1 4110-7: 5315010233881. Substitute compatibility should be verified for your specific system.
What is the NSN for 1 4110-7?
1 4110-7 is cataloged in the U.S. Government catalog under NSN 5315-01-023-3881. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1 4110-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.