PartsTable
Technical Data Sheet

1 3/32X1/2 — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1 3/32X1/2: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP B1112 OR STEEL COMP 1212 OVERALL, overall_length: 0.500 INCHES NOMINAL IN, first_end_style: OVAL, style_designator: FULL LENGTH GROOVE, surface_treatment: CADMIUM OVERALL, first_end_location: BOTH ENDS. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-951-6906, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1 3/32X1/2
NSN: 5315-00-951-6906
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 73957 — GROOV-PIN CORP (USA)
SPECIFICATIONS
materialSTEEL COMP B1112 OR STEEL COMP 1212 OVERALL
overall_length0.500 INCHES NOMINAL IN
first_end_styleOVAL
style_designatorFULL LENGTH GROOVE
surface_treatmentCADMIUM OVERALL
first_end_locationBOTH ENDS
first_end_outer_radius0.1150 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM IN
pin_large_end_diameter0.100 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
pin_small_end_diameter0.0928 INCHES MINIMUM AND 0.0938 INCHES MAXIMUM IN
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-951-6906
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1 3/32X1/2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END LOCATION: BOTH ENDS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FIRST END STYLE: OVAL
•
STYLE DESIGNATOR: FULL LENGTH GROOVE
•
PIN LARGE END DIAMETER: 0.100 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS
FIRST END LOCATIONBOTH ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END STYLEOVAL
STYLE DESIGNATORFULL LENGTH GROOVE
PIN LARGE END DIAMETER0.100 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH0.500 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN SMALL END DIAMETER0.0928 INCHES MINIMUM AND 0.0938 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
TYPE1 3-32DIA1-2LGReference document
Same NSN cross-reference
Reference document — Secondary reference
TYPE13-32X1-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
5315009516906Reference document
Same NSN cross-reference
Reference document — Informative reference only
MS35671-17Reference document
Same NSN cross-reference
Reference document — Secondary reference
6208986Reference document
Same NSN cross-reference
Reference document — Secondary reference
0124Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 1 3/32X1/2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1 3/32X1/2?
1 3/32X1/2 is a PIN,GROOVED,HEADLESS.
What parts can replace 1 3/32X1/2?
There are 6 known substitutes for 1 3/32X1/2: TYPE1 3-32DIA1-2LG, TYPE13-32X1-2, 5315009516906 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1 3/32X1/2?
1 3/32X1/2 is cataloged in the U.S. Government catalog under NSN 5315-00-951-6906. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1 3/32X1/2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.