PartsTable
Technical Data Sheet
PartsTable / O-RING / 0X58-012-15
0X58-012-15 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF, hardness_rating: 68.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, criticality_code_justification: ZZZY. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-771-3357, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0X58-012-15
NSN: 5331-00-771-3357
FSC: 5331 — O-RING
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
hardness_rating68.0 SHORE DUROMETER A NOMINAL
center_hole_diameter0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
criticality_code_justificationZZZY
material_document_and_classificationMIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5331-00-771-3357
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0X58-012-15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
HARDNESS RATING: 68.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE
•
TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
CRITICALITY CODE JUSTIFICATIONZZZY
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
HARDNESS RATING68.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE
TEMP RATING-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
05001-2Interchangeable
interchangeable cross-reference
interchangeable
011120ELInterchangeable
interchangeable cross-reference
interchangeable
011120XXInterchangeable
interchangeable cross-reference
interchangeable
6515NCM050026Interchangeable
interchangeable cross-reference
interchangeable
60813Interchangeable
interchangeable cross-reference
interchangeable
58-012-15CPInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0X58-012-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0X58-012-15?
0X58-012-15 is a O-RING.
What parts can replace 0X58-012-15?
There are 12 known substitutes for 0X58-012-15: 05001-2, 011120EL, 011120XX and 9 more. Substitute compatibility should be verified for your specific system.
Is 0X58-012-15 still available?
0X58-012-15 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0X58-012-15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026