0SMLS100M06-03CU: RIVET,BLIND.
The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING STEM, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN, shank_style: SELF-PLUGGING MECHANICALLY LOCKED STEM, shank_diameter: 0.172 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN, shear_strength: 1665 SINGLE POUNDS PER SQUARE INCH. This part is cataloged in the U.S.
Government catalog under NSN 5320-01-481-8993, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL CORROSION RESISTING STEM |
| head_style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| grip_length | 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN |
| shank_style | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| shank_diameter | 0.172 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN |
| shear_strength | 1665 SINGLE POUNDS PER SQUARE INCH |
| fastener_length | 0.350 INCHES MAXIMUM IN |
| expansion_device | SERRATED STEM-TYPE W |
| countersink_angle | 108.0 DEGREES MAXIMUM |
| head_major_diameter | 0.282 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN |
| minimum_tensile_strength | 1050 POUNDS PER SQUARE INCH LBS |
| NSN | 5320-01-481-8993 |
| SHANK DIAMETER | 0.172 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN |
| FASTENER LENGTH | 0.350 INCHES MAXIMUM IN |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| GRIP LENGTH | 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN |
| SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| MINIMUM TENSILE STRENGTH | 1050 POUNDS PER SQUARE INCH LBS |
| COUNTERSINK ANGLE | 108.0 DEGREES MAXIMUM |
| SHEAR STRENGTH | 1665 SINGLE POUNDS PER SQUARE INCH |
| MATERIAL | NICKEL ALLOY SLEEVE |
No substitute or cross-reference records for this part.