PartsTable
Technical Data Sheet
Download PDF

0SCRBH2 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0SCRBH2: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT B, case_style: SQUARE, seal_width: 0.750 INCHES NOMINAL IN, housing_bore_diameter: 3.355 INCHES NOMINAL IN, sealing_element_style: VERTICAL-ANGULAR, accommodated_shaft_diameter: 2.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-542-3471, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0SCRBH2
NSN: 5330-00-542-3471
FSC: 5330 — Packing and Gasket Materials
CAGE: 05643 — BARBER-GREENE CO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT B
case_styleSQUARE
seal_width0.750 INCHES NOMINAL IN
housing_bore_diameter3.355 INCHES NOMINAL IN
sealing_element_styleVERTICAL-ANGULAR
accommodated_shaft_diameter2.500 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-542-3471
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0SCRBH2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.750 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL-ANGULAR
•
HOUSING BORE DIAMETER: 3.355 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 2.500 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.750 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL-ANGULAR
HOUSING BORE DIAMETER3.355 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER2.500 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALWOOL SEALING ELEMENT A
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
SUBSTITUTES & CROSS-REFERENCES 3
10496SReference document
Same NSN cross-reference
Reference document — Secondary reference
335FM216Reference document
Same NSN cross-reference
Reference document — Secondary reference
24935Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 0SCRBH2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0SCRBH2?
0SCRBH2 is a SEAL,PLAIN ENCASED.
What parts can replace 0SCRBH2?
There are 3 known substitutes for 0SCRBH2: 10496S, 335FM216, 24935. Substitute compatibility should be verified for your specific system.
What is the NSN for 0SCRBH2?
0SCRBH2 is cataloged in the U.S. Government catalog under NSN 5330-00-542-3471. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0SCRBH2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.