PartsTable
Technical Data Sheet
Download PDF

0S1583 — BOLT,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

0S1583: BOLT,MACHINE.

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.549 INCHES MINIMUM AND 0.576 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.938 INCHES MAXIMUM IN, fastener_length: 1.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-426-2926, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0S1583
NSN: 5306-00-426-2926
FSC: 5306 — Bolts
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.549 INCHES MINIMUM AND 0.576 INCHES MAXIMUM IN
thread_class2A A
thread_length0.938 INCHES MAXIMUM IN
fastener_length1.250 INCHES NOMINAL IN
hardness_rating32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
width_between_flats1.060 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
nominal_thread_diameter0.750 INCHES IN
minimum_tensile_strength150000 POUNDS PER SQUARE INCH LBS
NSN5306-00-426-2926
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 0S1583 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.549 INCHES MINIMUM AND 0.576 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.938 INCHES MAXIMUM IN
•
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-1222,GR 8 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.750 INCHES IN
•
FEATURES PROVIDED: FINISHED HEAD
•
HEAD STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.549 INCHES MINIMUM AND 0.576 INCHES MAXIMUM IN
FASTENER LENGTH1.250 INCHES NOMINAL IN
THREAD LENGTH0.938 INCHES MAXIMUM IN
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-1222,GR 8 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.750 INCHES IN
FEATURES PROVIDEDFINISHED HEAD
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS1.060 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 4
271605Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-DTL-1222Reference document
Same NSN cross-reference
Reference document — Identification reference
24885R1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MIL-S-1222Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0S1583?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0S1583?
0S1583 is a BOLT,MACHINE.
What parts can replace 0S1583?
There are 4 known substitutes for 0S1583: 271605, MIL-DTL-1222, 24885R1 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0S1583?
0S1583 is cataloged in the U.S. Government catalog under NSN 5306-00-426-2926. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0S1583