PartsTable / COMPONENT / 0S1375-1
0S1375-1
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, outside_diameter: 2.378 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 2.374 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-1346, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
0S1375-1
NSN: 5330-00-285-1346 FSC: 5330 CAGE: 24981 — APACHE CORP GITS BROS MFG CO (USA)
SPECIFICATIONS
material RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.500 INCHES NOMINAL IN outside_diameter 2.378 INCHES NOMINAL IN surface_treatment PLASTIC CASE housing_bore_diameter 2.374 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 1.375 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 3000 FEET PER MINUTE FT NSN 5330-00-285-1346
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 0S1375-1
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
• HOUSING BORE DIAMETER: 2.374 INCHES NOMINAL IN
• OUTSIDE DIAMETER: 2.378 INCHES NOMINAL IN
• SURFACE TREATMENT: PLASTIC CASE
• SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLE SQUARE ACCOMMODATED SHAFT MAXIMUM RATED SPEED 3000 FEET PER MINUTE FT MATERIAL RUBBER SYNTHETIC SEALING ELEMENT HOUSING BORE DIAMETER 2.374 INCHES NOMINAL IN OUTSIDE DIAMETER 2.378 INCHES NOMINAL IN MATERIAL STEEL CASE SURFACE TREATMENT PLASTIC CASE SEALING ELEMENT STYLE ANGULAR SEAL WIDTH 0.500 INCHES NOMINAL IN ACCOMMODATED SHAFT DIAMETER 1.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
13738 Interchangeable interchangeable cross-reference
interchangeable
CH-7402K3 Interchangeable interchangeable cross-reference
interchangeable
7402 Interchangeable interchangeable cross-reference
interchangeable
152023C-2 Interchangeable interchangeable cross-reference
interchangeable
689 Interchangeable interchangeable cross-reference
interchangeable
DD5276 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 0S1375-1?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0S1375-1?
0S1375-1 is a SEAL,PLAIN ENCASED.
What parts can replace 0S1375-1?
There are 26 known substitutes for 0S1375-1: 13738, CH-7402K3, 7402 and 23 more. Substitute compatibility should be verified for your specific system.
Is 0S1375-1 still available?
0S1375-1 is currently cancelled.
Request a Quote — 0S1375-1