PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0S080007
0S080007 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.194 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN, outside_diameter: 0.323 INCHES NOMINAL IN, special_features: REQUIRES ENVIRONMENTAL TEST IN ACCORDANCE W/SPECIAL PROJECTS FLEET BALLISTIC MISSILE PLAN OP 2747, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: CADMIUM OR ZINC AND CHROMATE OVERALL, material_thickness: 0.040 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-771-3873, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0S080007
NSN: 5310-00-771-3873
FSC: 5310
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
hole_diameter0.194 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
outside_diameter0.323 INCHES NOMINAL IN
special_featuresREQUIRES ENVIRONMENTAL TEST IN ACCORDANCE W/SPECIAL PROJECTS FLEET BALLISTIC MISSILE PLAN OP 2747
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentCADMIUM OR ZINC AND CHROMATE OVERALL
material_thickness0.040 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
NSN5310-00-771-3873
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 0S080007 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM OR ZINC AND CHROMATE OVERALL
•
HOLE DIAMETER: 0.194 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.323 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.040 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM OR ZINC AND CHROMATE OVERALL
HOLE DIAMETER0.194 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.323 INCHES NOMINAL IN
SPECIAL FEATURESREQUIRES ENVIRONMENTAL TEST IN ACCORDANCE W/SPECIAL PROJECTS FLEET BALLISTIC MISSILE PLAN OP 2747
MATERIAL THICKNESS0.040 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
762-10LInterchangeable
interchangeable cross-reference
interchangeable
N40P9C12Interchangeable
interchangeable cross-reference
interchangeable
3090-10LInterchangeable
interchangeable cross-reference
interchangeable
AN935-10LInterchangeable
Same NIIN cross-reference
interchangeable
MS35337-43Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0S080007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0S080007?
0S080007 is a WASHER,LOCK.
What parts can replace 0S080007?
There are 5 known substitutes for 0S080007: 762-10L, N40P9C12, 3090-10L and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0S080007?
0S080007 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-771-3873. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0S080007

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026