PartsTable / COMPONENT / 0S-A5A
0S-A5A
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.281 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN, housing_bore_diameter: 1.499 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.052 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-2337, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
0S-A5A
NSN: 5330-00-291-2337 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.281 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN housing_bore_diameter 1.499 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 1.052 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-291-2337
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 0S-A5A
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEALING ELEMENT STYLE: ANGULAR
• ACCOMMODATED SHAFT DIAMETER: 1.052 INCHES NOMINAL IN
• SEAL WIDTH: 0.281 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
• HOUSING BORE DIAMETER: 1.499 INCHES NOMINAL IN
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLE SQUARE SEALING ELEMENT STYLE ANGULAR ACCOMMODATED SHAFT DIAMETER 1.052 INCHES NOMINAL IN SEAL WIDTH 0.281 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN HOUSING BORE DIAMETER 1.499 INCHES NOMINAL IN MATERIAL RUBBER SYNTHETIC SEALING ELEMENT ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT MATERIAL STEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
13676A Interchangeable interchangeable cross-reference
interchangeable
14812 Interchangeable interchangeable cross-reference
interchangeable
10-527 Interchangeable interchangeable cross-reference
interchangeable
BR4319 Interchangeable interchangeable cross-reference
interchangeable
1004-750 Interchangeable interchangeable cross-reference
interchangeable
7706771P7 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 0S-A5A?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0S-A5A?
0S-A5A is a SEAL,PLAIN ENCASED.
What parts can replace 0S-A5A?
There are 17 known substitutes for 0S-A5A: 13676A, 14812, 10-527 and 14 more. Substitute compatibility should be verified for your specific system.
Is 0S-A5A still available?
0S-A5A is currently cancelled.