PartsTable
Technical Data Sheet
PartsTable / O-RING / 0R224TG
0R224TG ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, outside_diameter: 22.92 INCHES NOMINAL IN, center_hole_diameter: 22.4 INCHES NOMINAL IN, cross-sectional_height: 0.260 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-815-4046, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0R224TG
NSN: 5331-00-815-4046
FSC: 5331 — O-RING
CAGE: 73842 — GOODYEAR TIRE AND RUBBER CO THE (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
outside_diameter22.92 INCHES NOMINAL IN
center_hole_diameter22.4 INCHES NOMINAL IN
cross-sectional_height0.260 INCHES NOMINAL IN
NSN5331-00-815-4046
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0R224TG MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.260 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 22.4 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
•
OUTSIDE DIAMETER: 22.92 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.260 INCHES NOMINAL IN
CENTER HOLE DIAMETER22.4 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
OUTSIDE DIAMETER22.92 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
43158Interchangeable
interchangeable cross-reference
interchangeable
63910-001-1Interchangeable
interchangeable cross-reference
interchangeable
ROM/PROM FAMILY 008Interchangeable
interchangeable cross-reference
interchangeable
42754Interchangeable
interchangeable cross-reference
interchangeable
722912-51Interchangeable
interchangeable cross-reference
interchangeable
WE-4172Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0R224TG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0R224TG?
0R224TG is a O-RING.
What parts can replace 0R224TG?
There are 15 known substitutes for 0R224TG: 43158, 63910-001-1, ROM/PROM FAMILY 008 and 12 more. Substitute compatibility should be verified for your specific system.
Is 0R224TG still available?
0R224TG is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0R224TG

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026