PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0P151
0P151 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, housing_bore_diameter: 4.999 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 3.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-2311, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0P151
NSN: 5330-00-641-2311
FSC: 5330
CAGE: 80906 — BLAW-KNOX CONSTRUCTION EQUIPMENT CO DIV OF WHITE CONSOLIDATED INDUSTRIES INC (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
housing_bore_diameter4.999 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter3.875 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-641-2311
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0P151 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL CASE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT DIAMETER: 3.875 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 4.999 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL CASE
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
SEAL WIDTH0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER3.875 INCHES NOMINAL IN
HOUSING BORE DIAMETER4.999 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
61150Interchangeable
interchangeable cross-reference
interchangeable
576366-1110Interchangeable
interchangeable cross-reference
interchangeable
5GPHPLPF80-60DEGInterchangeable
interchangeable cross-reference
interchangeable
F80PLP5GPH60DEGInterchangeable
interchangeable cross-reference
interchangeable
F80-5GPH60DEGInterchangeable
interchangeable cross-reference
interchangeable
ACC61150Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0P151?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0P151?
0P151 is a SEAL,PLAIN ENCASED.
What parts can replace 0P151?
There are 14 known substitutes for 0P151: 61150, 576366-1110, 5GPHPLPF80-60DEG and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0P151?
0P151 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-2311. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0P151

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026