PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0N507687
0N507687 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 360 OVERALL, overall_length: 3.109 INCHES MINIMUM AND 3.141 INCHES MAXIMUM IN, handle_clearance: 1.172 INCHES MINIMUM AND 1.204 INCHES MAXIMUM IN, surface_treatment: NICKEL OVERALL, nominal_thread_size: 0.190 INCHES IN, thread_series_designator: UNF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-824-9784, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0N507687
NSN: 5340-00-824-9784
FSC: 5340
CAGE: 98230 — NATIONAL SECURITY AGENCY (USA)
SPECIFICATIONS
materialCOPPER ALLOY 360 OVERALL
overall_length3.109 INCHES MINIMUM AND 3.141 INCHES MAXIMUM IN
handle_clearance1.172 INCHES MINIMUM AND 1.204 INCHES MAXIMUM IN
surface_treatmentNICKEL OVERALL
nominal_thread_size0.190 INCHES IN
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationQQ-B-626,1/2H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-N-290,CLASS 1,TYPE 6 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length2.984 INCHES MINIMUM AND 3.016 INCHES MAXIMUM IN
NSN5340-00-824-9784
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0N507687 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER ALLOY 360 OVERALL
•
HANDLE CLEARANCE: 1.172 INCHES MINIMUM AND 1.204 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 2.984 INCHES MINIMUM AND 3.016 INCHES MAXIMUM IN
•
SURFACE TREATMENT: NICKEL OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-N-290,CLASS 1,TYPE 6 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES DESIGNATOR: UNF
•
MOUNTING FACILITY QUANTITY: 2
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER ALLOY 360 OVERALL
HANDLE CLEARANCE1.172 INCHES MINIMUM AND 1.204 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH2.984 INCHES MINIMUM AND 3.016 INCHES MAXIMUM IN
SURFACE TREATMENTNICKEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-N-290,CLASS 1,TYPE 6 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNF
OVERALL LENGTH3.109 INCHES MINIMUM AND 3.141 INCHES MAXIMUM IN
MOUNTING FACILITY QUANTITY2
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626,1/2H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE0.190 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
MX8758UPXInterchangeable
interchangeable cross-reference
interchangeable
101512Interchangeable
interchangeable cross-reference
interchangeable
2352X3Interchangeable
interchangeable cross-reference
interchangeable
J512Interchangeable
interchangeable cross-reference
interchangeable
26-X-503Interchangeable
interchangeable cross-reference
interchangeable
S9167-A8-MMO-010 FIG 7-4-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0N507687?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0N507687?
0N507687 is a HANDLE,BOW.
What parts can replace 0N507687?
There are 7 known substitutes for 0N507687: MX8758UPX, 101512, 2352X3 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0N507687?
0N507687 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-824-9784. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0N507687

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026