PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0N505508
0N505508 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.380 INCHES NOMINAL IN, length: 0.750 INCHES NOMINAL IN, material: PLASTIC OVERALL, hole_diameter: 0.188 INCHES NOMINAL IN, overall_height: 0.620 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-127-1819, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0N505508
NSN: 5340-01-127-1819
FSC: 5340
CAGE: 98230 — NATIONAL SECURITY AGENCY (USA)
SPECIFICATIONS
width0.380 INCHES NOMINAL IN
length0.750 INCHES NOMINAL IN
materialPLASTIC OVERALL
hole_diameter0.188 INCHES NOMINAL IN
overall_height0.620 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
loop/holding_dimension0.250 INCHES NOMINAL IN
NSN5340-01-127-1819
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0N505508 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL: PLASTIC OVERALL
•
WIDTH: 0.380 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.250 INCHES NOMINAL IN
•
LENGTH: 0.750 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING METHODUNTHREADED HOLE(S)
MATERIALPLASTIC OVERALL
WIDTH0.380 INCHES NOMINAL IN
OVERALL HEIGHT0.620 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.250 INCHES NOMINAL IN
LENGTH0.750 INCHES NOMINAL IN
HOLE DIAMETER0.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
547EInterchangeable
interchangeable cross-reference
interchangeable
225PInterchangeable
interchangeable cross-reference
interchangeable
125P-4578Interchangeable
interchangeable cross-reference
interchangeable
7-581-000369Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0N505508?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0N505508?
0N505508 is a CLIP,SPRING TENSION.
What parts can replace 0N505508?
There are 4 known substitutes for 0N505508: 547E, 225P, 125P-4578 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0N505508?
0N505508 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-127-1819. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0N505508

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026