Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN, material: RUBBER CHLOROPRENE CLASS CR CUSHION, lug_width: 0.500 INCHES NOMINAL IN, overall_width: 0.625 INCHES NOMINAL IN, style_designator: RIGHT HAND CLAMP & BRACKET, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-185-2376, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
0N313317
NSN:5340-01-185-2376 FSC:5340 CAGE:98230 — NATIONAL SECURITY AGENCY (USA)
SPECIFICATIONS
diameter
0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN
material
RUBBER CHLOROPRENE CLASS CR CUSHION
lug_width
0.500 INCHES NOMINAL IN
overall_width
0.625 INCHES NOMINAL IN
style_designator
RIGHT HAND CLAMP & BRACKET
tongue_hole_type
ROUND, UNTHREADED
lug_hole_diameter
0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN
material_thickness
0.051 INCHES NOMINAL IN
loop_inside_diameter
0.438 INCHES NOMINAL IN
cushioning_environmental_protection
HEAT AND OIL RESISTANT AND WEATHER RESISTANT
material_document_and_classification
AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end
0.890 INCHES NOMINAL IN
NSN
5340-01-185-2376
COMPONENT DIAGRAM
KEY FEATURES
•
LUG HOLE DIAMETER: 0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 0.438 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
•
STYLE DESIGNATOR: RIGHT HAND CLAMP & BRACKET
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT AND OIL RESISTANT AND WEATHER RESISTANT
•
DIAMETER: 0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
LUG HOLE DIAMETER
0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER
0.438 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION
AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MATERIAL
ALUMINUM ALLOY 2024 BAND
STYLE DESIGNATOR
RIGHT HAND CLAMP & BRACKET
TONGUE HOLE TYPE
ROUND, UNTHREADED
CUSHIONING ENVIRONMENTAL PROTECTION
HEAT AND OIL RESISTANT AND WEATHER RESISTANT
DIAMETER
0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0N313317?
0N313317 is a CLAMP,LOOP.
What parts can replace 0N313317?
There are 3 known substitutes for 0N313317: 012306-0001, 5945PL1279688, 70R4-24DCSC0. Substitute compatibility should be verified for your specific system.
What is the NSN for 0N313317?
0N313317 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-185-2376. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.