PartsTable / COMPONENT / 0N102768
0N102768
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING, construction: ONE-PIECE, outside_diameter: 0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN, surface_treatment: CADMIUM RETAINER, retainer_thickness: 0.050 INCHES NOMINAL IN, packing_inside_diameter: 0.188 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-579-6857, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
0N102768
NSN: 5330-00-579-6857 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING construction ONE-PIECE outside_diameter 0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN surface_treatment CADMIUM RETAINER retainer_thickness 0.050 INCHES NOMINAL IN packing_inside_diameter 0.188 INCHES NOMINAL IN material_document_and_classification MIL-S-6855,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE PACKING packing_ring_cross-sectional_diameter 0.067 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN NSN 5330-00-579-6857
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 0N102768
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• PACKING INSIDE DIAMETER: 0.188 INCHES NOMINAL IN
• SURFACE TREATMENT: CADMIUM RETAINER
• MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6855,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE PACKING
• PACKING RING CROSS-SECTIONAL DIAMETER: 0.067 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN
• RETAINER THICKNESS: 0.050 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL STEEL RETAINER PACKING INSIDE DIAMETER 0.188 INCHES NOMINAL IN CONSTRUCTION ONE-PIECE SURFACE TREATMENT CADMIUM RETAINER MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING MATERIAL DOCUMENT AND CLASSIFICATION MIL-S-6855,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE PACKING PACKING RING CROSS-SECTIONAL DIAMETER 0.067 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN RETAINER THICKNESS 0.050 INCHES NOMINAL IN OUTSIDE DIAMETER 0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
236439 Interchangeable interchangeable cross-reference
interchangeable
213213 Interchangeable interchangeable cross-reference
interchangeable
22303 Interchangeable interchangeable cross-reference
interchangeable
PAD243 Interchangeable interchangeable cross-reference
interchangeable
50129 Interchangeable interchangeable cross-reference
interchangeable
ST-288 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 0N102768?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0N102768?
0N102768 is a PACKING WITH RETAINER.
What parts can replace 0N102768?
There are 21 known substitutes for 0N102768: 236439, 213213, 22303 and 18 more. Substitute compatibility should be verified for your specific system.
Is 0N102768 still available?
0N102768 is currently cancelled.
Request a Quote — 0N102768