PartsTable
Technical Data Sheet
Download PDF

0N008388 — LOCK,RIM

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0N008388: LOCK,RIM.

The LOCK,RIM is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY CASE, thickness: 0.063 INCHES MINIMUM MEMBER IN, design_type: DEAD BOLT, backset_depth: 0.250 INCHES NOMINAL IN, operation_method: OUTSIDE KEY DEAD BOLT, special_features: KEY CHANGE QTY:NONE;MASTER KEY PROVISION:NOT INCLUDED;. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-955-1718, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0N008388
NSN: 5340-00-955-1718
FSC: 5340 — Hardware, Commercial
CAGE: 98230 — NATIONAL SECURITY AGENCY (USA)
SPECIFICATIONS
materialCOPPER ALLOY CASE
thickness0.063 INCHES MINIMUM MEMBER IN
design_typeDEAD BOLT
backset_depth0.250 INCHES NOMINAL IN
operation_methodOUTSIDE KEY DEAD BOLT
special_featuresKEY CHANGE QTY:NONE;MASTER KEY PROVISION:NOT INCLUDED;
locking_mechanism_typeDISK TUMBLER
NSN5340-00-955-1718
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0N008388 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOCKING MECHANISM TYPE: DISK TUMBLER
•
DESIGN TYPE: DEAD BOLT
•
MATERIAL: COPPER ALLOY CASE
•
BACKSET DEPTH: 0.250 INCHES NOMINAL IN
•
OPERATION METHOD: OUTSIDE KEY DEAD BOLT
•
THICKNESS: 0.063 INCHES MINIMUM MEMBER IN
TECHNICAL CHARACTERISTICS
LOCKING MECHANISM TYPEDISK TUMBLER
DESIGN TYPEDEAD BOLT
SPECIAL FEATURESKEY CHANGE QTY:NONE;MASTER KEY PROVISION:NOT INCLUDED;
MATERIALCOPPER ALLOY CASE
BACKSET DEPTH0.250 INCHES NOMINAL IN
OPERATION METHODOUTSIDE KEY DEAD BOLT
THICKNESS0.063 INCHES MINIMUM MEMBER IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0N008388?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0N008388?
0N008388 is a LOCK,RIM.
What is the NSN for 0N008388?
0N008388 is cataloged in the U.S. Government catalog under NSN 5340-00-955-1718. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0N008388

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.