PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0L03-3A
0L03-3A ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 17.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 10.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-516-5419, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0L03-3A
NSN: 3110-00-516-5419
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter17.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width10.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter35.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.3
NSN3110-00-516-5419
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 0L03-3A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
MATERIAL: PLASTIC PHENOLIC RETAINER
•
LOAD DIRECTION: ANGULAR
•
RETAINER FABRICATION METHOD: MACHINED
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
MATERIALPLASTIC PHENOLIC RETAINER
MATERIALSTEEL BALL
MATERIALSTEEL INNER RING
LOAD DIRECTIONANGULAR
RETAINER FABRICATION METHODMACHINED
BORE SHAPESTRAIGHT
MATERIALSTEEL OUTER RING
STANDARD TOLERANCE DESIGNATIONABEC NO.3
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
20-1526Interchangeable
interchangeable cross-reference
interchangeable
RLR05C220GMInterchangeable
interchangeable cross-reference
interchangeable
7906448-16Interchangeable
interchangeable cross-reference
interchangeable
840K23Interchangeable
interchangeable cross-reference
interchangeable
3003342Interchangeable
interchangeable cross-reference
interchangeable
20-89-59Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0L03-3A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0L03-3A?
0L03-3A is a BEARING,BALL,ANNULAR.
What parts can replace 0L03-3A?
There are 9 known substitutes for 0L03-3A: 20-1526, RLR05C220GM, 7906448-16 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0L03-3A?
0L03-3A is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-516-5419. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0L03-3A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026