PartsTable
Technical Data Sheet
Download PDF

0E2170 — BELLOWS,PROTECTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0E2170: BELLOWS,PROTECTION.

The BELLOWS,PROTECTION is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, neutral_length: 5.000 INCHES NOMINAL IN, fsc_application_data: PUSH-PULL CONTROL ASSEMBLY,TRACTOR,HIGH SPEED, thickness_at_both_ends: 0.125 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN, large_end_inside_length: 0.188 INCHES NOMINAL IN, small_end_inside_length: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-628-3404, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0E2170
NSN: 5340-00-628-3404
FSC: 5340 — Hardware, Commercial
CAGE: 92392 — ALLIS-CHALMERS CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
neutral_length5.000 INCHES NOMINAL IN
fsc_application_dataPUSH-PULL CONTROL ASSEMBLY,TRACTOR,HIGH SPEED
thickness_at_both_ends0.125 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
large_end_inside_length0.188 INCHES NOMINAL IN
small_end_inside_length0.375 INCHES NOMINAL IN
large_end_outside_length0.188 INCHES NOMINAL IN
small_end_outside_length0.375 INCHES NOMINAL IN
large_end_inside_diameter0.375 INCHES NOMINAL IN
small_end_inside_diameter0.250 INCHES NOMINAL IN
large_end_outside_diameter0.750 INCHES NOMINAL IN
small_end_outside_diameter0.500 INCHES NOMINAL IN
NSN5340-00-628-3404
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0E2170 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: PUSH-PULL CONTROL ASSEMBLY,TRACTOR,HIGH SPEED
•
LARGE END OUTSIDE LENGTH: 0.188 INCHES NOMINAL IN
•
SMALL END INSIDE DIAMETER: 0.250 INCHES NOMINAL IN
•
LARGE END INSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
LARGE END OUTSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
SMALL END OUTSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
SMALL END OUTSIDE LENGTH: 0.375 INCHES NOMINAL IN
•
NEUTRAL LENGTH: 5.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATAPUSH-PULL CONTROL ASSEMBLY,TRACTOR,HIGH SPEED
LARGE END OUTSIDE LENGTH0.188 INCHES NOMINAL IN
SMALL END INSIDE DIAMETER0.250 INCHES NOMINAL IN
LARGE END INSIDE DIAMETER0.375 INCHES NOMINAL IN
LARGE END OUTSIDE DIAMETER0.750 INCHES NOMINAL IN
SMALL END OUTSIDE DIAMETER0.500 INCHES NOMINAL IN
SMALL END OUTSIDE LENGTH0.375 INCHES NOMINAL IN
NEUTRAL LENGTH5.000 INCHES NOMINAL IN
SMALL END INSIDE LENGTH0.375 INCHES NOMINAL IN
LARGE END INSIDE LENGTH0.188 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
6283404Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 0E2170?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0E2170?
0E2170 is a BELLOWS,PROTECTION.
What parts can replace 0E2170?
There is 1 known substitute for 0E2170: 6283404. Substitute compatibility should be verified for your specific system.
What is the NSN for 0E2170?
0E2170 is cataloged in the U.S. Government catalog under NSN 5340-00-628-3404. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0E2170

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.