PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0B
0B ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The DRILLING MACHINE,UPRIGHT is a the manufacturer industrial component. Key specifications include lamp_type: INCANDESCENT, overall_depth: 3.000 INCHES NOMINAL IN, luminous_scale: NOT PROVIDED, overall_diameter: 3.062 INCHES NOMINAL IN, dial_illumination: PROVIDED, installation_design: FIXED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-113-5252, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0B
NSN: 5340-00-113-5252
FSC: 5340
CAGE: 76369 — MINERALLAC ELECTRIC CO (USA)
SPECIFICATIONS
lamp_typeINCANDESCENT
overall_depth3.000 INCHES NOMINAL IN
luminous_scaleNOT PROVIDED
overall_diameter3.062 INCHES NOMINAL IN
dial_illuminationPROVIDED
installation_designFIXED
scale_measurement_unitREVOLUTIONS PER MINUTE
scale_measurement_range+0.0 TO 4000.0
scale_smallest_increment0.5 REVOLUTIONS PER MINUTE
lamp_voltage_rating_in_volts12.0
NSN5340-00-113-5252
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0B MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPORTED ITEM AND QUANTITY: 1 PIPE
•
PIPE ACCOMMODATION DIAMETER: 0.500 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC
•
STYLE DESIGNATOR: SPLIT RING
•
MATERIAL: STEEL
•
TUBE ACCOMMODATION OUTSIDE DIAMETER: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SUPPORTED ITEM AND QUANTITY1 PIPE
PIPE ACCOMMODATION DIAMETER0.500 INCHES NOMINAL IN
SURFACE TREATMENTZINC
STYLE DESIGNATORSPLIT RING
MATERIALSTEEL
TUBE ACCOMMODATION OUTSIDE DIAMETER0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
0BUpgraded Successor
successor cross-reference
successor
MW0Upgraded Successor
successor cross-reference
successor
13200E9119Interchangeable
interchangeable cross-reference
interchangeable
5342PL1379181Interchangeable
interchangeable cross-reference
interchangeable
8191261Interchangeable
interchangeable cross-reference
interchangeable
TC1467Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0B?
0B is a DRILLING MACHINE,UPRIGHT.
What parts can replace 0B?
There are 7 known substitutes for 0B: 0B, MW0, 13200E9119 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0B?
0B is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-113-5252. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026