PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 09NE-246 (MONEL)
09NE-246 (MONEL) ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The 09NE-246 (MONEL) is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-044-7273, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
09NE-246 (MONEL)
NSN: 5310-01-044-7273
FSC: 5310
CAGE: 019L2 — ESNA, LLC (USA)
SPECIFICATIONS
Part Number09NE-246 (MONEL)
NSN5310-01-044-7273
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 09NE-246 (MONEL) · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
BEARING SURFACE FINISH: 125.0 MICROINCHES
•
TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF
•
THREAD QUANTITY PER INCH: 6
•
NUT STYLE: HEXAGON
•
NOMINAL THREAD SIZE: 1.500 INCHES IN
•
COUNTERSINK ANGLE: 88.0 DEGREES NOMINAL NUT
•
NUT HEIGHT: 1.578 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
BEARING SURFACE FINISH125.0 MICROINCHES
TEMP RATING250.0 FAHRENHEIT NOMINAL DEGF
THREAD QUANTITY PER INCH6
NUT STYLEHEXAGON
NOMINAL THREAD SIZE1.500 INCHES IN
COUNTERSINK ANGLE88.0 DEGREES NOMINAL NUT
NUT HEIGHT1.578 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
COUNTERBORE DIAMETER1.548 INCHES MINIMUM AND 1.588 INCHES MAXIMUM NUT IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
6537775-33Interchangeable
interchangeable cross-reference
interchangeable
211025743Interchangeable
interchangeable cross-reference
interchangeable
561-6405734-SGMC FIND A31-1L1Interchangeable
interchangeable cross-reference
interchangeable
MS17828-24CSSInterchangeable
interchangeable cross-reference
interchangeable
MS17828-24CInterchangeable
interchangeable cross-reference
interchangeable
845-7016077-X-009Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 09NE-246 (MONEL)?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 09NE-246 (MONEL)?
09NE-246 (MONEL) is a 09NE-246 (MONEL).
What parts can replace 09NE-246 (MONEL)?
There are 8 known substitutes for 09NE-246 (MONEL): 6537775-33, 211025743, 561-6405734-SGMC FIND A31-1L1 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 09NE-246 (MONEL)?
09NE-246 (MONEL) is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-044-7273. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 09NE-246 (MONEL)

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026