PartsTable
Technical Data Sheet
Download PDF

09ND36-080 — NUT,SELF-LOCKING,SPLINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

09ND36-080: NUT,SELF-LOCKING,SPLINE.

The NUT,SELF-LOCKING,SPLINE is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY OVERALL, nut_style: SPLINE, nut_height: 0.938 INCHES NOMINAL IN, nut_diameter: 0.875 INCHES NOMINAL IN, pilot_length: 0.563 INCHES NOMINAL IN, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-067-8549, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
09ND36-080
NSN: 5310-01-067-8549
FSC: 5310 — Nuts and Washers
CAGE: 019L2 — ESNA, LLC (USA)
SPECIFICATIONS
materialNICKEL ALLOY OVERALL
nut_styleSPLINE
nut_height0.938 INCHES NOMINAL IN
nut_diameter0.875 INCHES NOMINAL IN
pilot_length0.563 INCHES NOMINAL IN
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
pilot_diameter0.696 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
nominal_thread_size0.500 INCHES IN
thread_quantity_per_inch20
NSN5310-01-067-8549
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 09ND36-080 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
NUT DIAMETER: 0.875 INCHES NOMINAL IN
•
PILOT DIAMETER: 0.696 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.563 INCHES NOMINAL IN
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
•
NUT HEIGHT: 0.938 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
NUT DIAMETER0.875 INCHES NOMINAL IN
PILOT DIAMETER0.696 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
PILOT LENGTH0.563 INCHES NOMINAL IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
NUT HEIGHT0.938 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
NUT STYLESPLINE
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
2113414 PIECE 6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 09ND36-080?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 09ND36-080?
09ND36-080 is a NUT,SELF-LOCKING,SPLINE.
What parts can replace 09ND36-080?
There is 1 known substitute for 09ND36-080: 2113414 PIECE 6. Substitute compatibility should be verified for your specific system.
What is the NSN for 09ND36-080?
09ND36-080 is cataloged in the U.S. Government catalog under NSN 5310-01-067-8549. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 09ND36-080

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.